Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Correct measurement between flatwork on a strat bobbin

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Correct measurement between flatwork on a strat bobbin

    Anyone know? I think it was .557". Does that sound right?

  • #2
    If you mean bobbin height ,"between the flats" as some refer to it .557" is way to high
    the standard is around .436"
    "UP here in the Canada we shoot things we don't understand"

    Comment


    • #3
      Ah, I think my previous spacers were .457.... I used to have wood spacers I used when I assembled pickup bobbins, but I lost them in the last month or two. Now I'm going to put another 20 or 30 bobbins together, and thought I'd make up some new spacers... I don't have any assembled bobbins to check from, as I sold all the old stock I'd assembled last year.... Man, I need to start thinking ahead when I do stuff like this!

      Comment


      • #4
        Or if your Metric 11mm.
        T
        "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
        Terry

        Comment

        Working...
        X