Neusilber baseplate for humbucker

[MrCandy]

Neusilber baseplate for humbucker(50-52mm bobbin type).
The material characterized by corrosion resistance, high strength and elasticity after deformation satisfactory ductility in the hot and cold.
Unlike the brass baseplates gives a bright mellow sound at mid range frequencies,
reduces "spurious" high range frequencies.
If you need other sizes please mail us on andrysaleshandling@gmail.com or you can ask your questions related. We can produce any sizes or quantity you need
so please contact us if you need something specific.
Also check ebay
Item Id: 140561094013 to see the item we offer.

[David Schwab]

I'm curious why you are calling it "neusilber" and not the English word "nickel silver"? I don't think too many English speaking people will know what that means.

It's nice to see three mounting holes.

[copperheadroads]

I had to google "Neusilber" & = german silver

[MrCandy]

I'm curious why you are calling it "neusilber" and not the English word "nickel silver"? I don't think too many English speaking people will know what that means.

It's nice to see three mounting holes.

Hi David.
Thank you for your comments, we really appreciate them.
1) About Neusilber - "new silver"- an alloy of copper and 5-35% nickel and 13-45% zinc(Just to make it more clear for English speaking people, with respect of course)
2) About those three mounting holes you mantioned, we got a short leg for those who dont want to "destroy" the guitar to mount it

[David Schwab]

Hi David.
Thank you for your comments, we really appreciate them.
1) About Neusilber - "new silver"- an alloy of copper and 5-35% nickel and 13-45% zinc(Just to make it more clear for English speaking people, with respect of course)
2) About those three mounting holes you mantioned, we got a short leg for those who dont want to "destroy" the guitar to mount it

Right, neusilber is German for what we call German silver or nickel silver.

Short legs are good, as are the three mounting holes, in my opinion anyway!

[kev]

I had to google "Neusilber" & = german silver

I am more intrigued by the word "spurious"

It may just become my new favorite word.

[David King]

Are the mounting holes threaded 3-48 or metric? what is the distance between the outer mounting holes? Does it match Carvin rings for example?

[MrCandy]

Are the mounting holes threaded 3-48 or metric? what is the distance between the outer mounting holes? Does it match Carvin rings for example?

Pickup-Frames () | Schaller-Electronic -
This current item is made for these rings, but we can make individual dimensions you need, just mail us the draft.
About thread - we can make metric thread M3 or we can provide the item with stamp hole for your thread.
Please ask everything you need to know about our products on this great forum or mail us on andrysaleshandling@gmail.com and
we will give a detailed response for every question that will be asked.
By the way soon we will start to produce Hole Keeper Bars(Spacers) for 50-52mm bobbin type performed on the milling machine,
so if anyone interested ask your questions.

With respect MrCandy.

[David Schwab]

Can you make nickel silver pickup covers with no holes? I need some in unusual sizes.

[the great waldo]

Pickup-Frames () | Schaller-Electronic -
This current item is made for these rings, but we can make individual dimensions you need, just mail us the draft.
About thread - we can make metric thread M3 or we can provide the item with stamp hole for your thread.
Please ask everything you need to know about our products on this great forum or mail us on andrysaleshandling@gmail.com and
we will give a detailed response for every question that will be asked.
By the way soon we will start to produce Hole Keeper Bars(Spacers) for 50-52mm bobbin type performed on the milling machine,
so if anyone interested ask your questions.

With respect MrCandy.

Hi Mrcandy
It might be an idea to supply paf spec baseplates 49.2 and with pole screw holes a little smaller than the the usual suppliers have so that they can be tapped for 5-40 size US threads by the buyer the original pafs had threaded holes in the baseplates unlike the modern far eastern supplied plates suitable keeper bars are also a good idea.

Good luck

All the best

Andrew

[MrCandy]

Can you make nickel silver pickup covers with no holes? I need some in unusual sizes.

We have access to soft nickel silver so we are thinking about the production of nickel silver pickup covers for puffs.
At the present time we do not consider the question of production unusual sizes precisely for pickup covers.

[MrCandy]

Hi Mrcandy
It might be an idea to supply paf spec baseplates 49.2 and with pole screw holes a little smaller than the the usual suppliers have so that they can be tapped for 5-40 size US threads by the buyer the original pafs had threaded holes in the baseplates unlike the modern far eastern supplied plates suitable keeper bars are also a good idea.

Good luck

All the best

Andrew

It is possible.
Please send us the draws and delails to andrysaleshandling@gmail.com or private message on forum
and we will make any quantity you need.

With respect
MrCandy

[StarryNight]

suppliers seem to be offering humbucker bobbins in 49.2, 50 and 53mm which might be useful for selling more baseplates

[MrCandy]

suppliers seem to be offering humbucker bobbins in 49.2, 50 and 53mm which might be useful for selling more baseplates

Thanks for your information StarryNight, but as we post earlier we can produce baseplates for any type of bobbin including custom sizes.
At the present time we develop web site that will be available in the near future for our clients to know
everything in detail about our production.

We really appreciate advices and opinions of each member of Pickup Makers community
With respect
MrCandy