HSS Pickup Polarity

[big_teee]

Look at the Duncan diagram I posted a link to. That does not have a super switch. The pickup selector has two sides (poles). You only use one side to switch the pickups. So you put the series connection from the bridge pickup to the other side. Depending on which way you way to split it (stud or screw) you connect the series link to either ground or hot.

Just follow the Duncan diagram. They are showing a single coil size humbucker, but it doesn't matter. See how it says "auto-split"? It splits the humbucker in position 4 (middle and bridge), so you now have two single coils. They will hum cancel is you use the right coil from the humbucker.

Ok I finally get it.
Heres a fender layout similar.
http://support.fender.com/service_di...4700D_SISD.pdf
Hit me UpSide the Head with the 4x4!
T