I need Di-Marzio HB measurements

[David King]

I need to make some custom pickup rings for the bridge and neck DiMarzio pickups. Apparently the bridge and neck coils are different lengths.
If someone here has a DiMarzio pickup or two and an accurate set of calipers. I need to know the width and length of the of an uncovered humbucker i.e.
the width of the side-by-side coils + any wire and tape that pushes past the edge of the bobbin edges. End to end length as well.

Thanks!

[RedHouse]

Most DiMarzio pickups fit standard mounting rings.

[big_teee]

Try this.
Installation And Dimensions | DiMarzio
Pick the Pickup you want the dimensions of.
T

[David King]

Thanks fellers,
The customer finally got a caliper and sent me accurate dimensions, the coils were lopsided to one side so extra had to be added.
Width of two bobbin side by side was 36.8 x 68mm for the neck AĦr Norton
Bridge Crunchlab dims were 35.6 x 70mm

[nickc35]

Thanks fellers,
The customer finally got a caliper and sent me accurate dimensions, the coils were lopsided to one side so extra had to be added.
Width of two bobbin side by side was 36.8 x 68mm for the neck AĦr Norton
Bridge Crunchlab dims were 35.6 x 70mm

Nice custom pickup rings David! What type of wood did you use?

[David King]

Ziricoté, Thanks.