Tweet
....
thats coil height? not center post thickness?
thats coil height? not center post thickness?
-
http://www.SDpickups.com
Stephens Design Pickups -
That was coil hight (.252"). I read .257" for the center post on the screw and .259" on the slug.Originally posted by Possum View PostIt would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. — Albert Einstein
http://coneyislandguitars.com
www.soundcloud.com/davidravenmoonComment
-
Hello,
after reading all those post I wonder wich effect on the tone will happen wehn routing the centershaft of a bobbin and chance the coil dimension ?
best
DavidComment
-
These match my measurements for both the Montreux and StewMac bobbins.Originally posted by David Schwab View PostComment
-
Heh. I tried that once. If you have a decent setup I suppose you could do it. I made an awful mess of a couple of bobbins. I know some folks here have split them to add spacers to make taller bobbins, etc.Originally posted by Electricdaveyboy View PostComment
Comment