Announcement

Collapse
No announcement yet.

Intro and a Winder Meteor ME301

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by MBL View Post
    Thanks for the info! here's a little better pic of what all the tensioner has with it. I'd for sure need to replace the plastic pulleys, but is this not something I could have made?
    Is there a patent number anywhere on it? That's your best bet for figuring them out. I do recall seeing patents.

    Comment


    • #17
      I suggest you contact Meteor (info@meteor.ch) for the winder and tensioner manual. I did that three years ago for ME307 manual. They were very responsive, I received the manual next day.
      https://www.facebook.com/FatChanceGuitars

      Comment


      • #18
        Well, I went and got one of those wheels on order. I promise not to turn the knob without the motor running.
        I do need the manual. Baby steps I suppose.




        I did do some cleaning up of the machine.

        Tim
        MBL

        Comment


        • #19
          Hello Tim. I have an ME 301 B, too, that i have been restoring. Hope yours is going well. PM me and we can keep in touch.

          I recently had to fix the relay module for the indicator lights by tracking down the proper relay specs and ordering a replacement from Mouser. I also found a lower cost fix to the friction wheel with the same specs as the original. Let me know if you are having success witht the restoration.

          rdur

          Comment


          • #20
            Welcome to the forum MBL!

            ken
            www.angeltone.com

            Comment

            Working...
            X