Tweet
Hello All,
I am wanting to modify a Korg PB-02 tuner to only have one of the inputs access the bypass out.
Main question:
Is there a way to sever the "bypass" out connection from either the "A" or "B" input?
Scenario would be an Electric Guitar in input "A"(or B), which passes it's signal out the bypass to an amplifier, while input "B"(or A) would be an acoustic guitar which would send it's signal to a direct box before the tuner input.
Result being the electric guitar passes signal through the tuner and the bypass out to the amp, while the acoustic passes signal into a direct box prior to the the tuner but does not pass signal out the bypass to the electric guitar amp.
Looking forward to any and all replies,
Thanks!
Bo
I am wanting to modify a Korg PB-02 tuner to only have one of the inputs access the bypass out.
Main question:
Is there a way to sever the "bypass" out connection from either the "A" or "B" input?
Scenario would be an Electric Guitar in input "A"(or B), which passes it's signal out the bypass to an amplifier, while input "B"(or A) would be an acoustic guitar which would send it's signal to a direct box before the tuner input.
Result being the electric guitar passes signal through the tuner and the bypass out to the amp, while the acoustic passes signal into a direct box prior to the the tuner but does not pass signal out the bypass to the electric guitar amp.
Looking forward to any and all replies,
Thanks!
Bo