Tweet
Dear All,
Need service manual for Mackie MCU Pro , Power switch had bad contact, and +7.5v from power supply was jumping up and down, so MCU PRO Cpu v3.0.0 was faulty, now we get new CPU? but system starts. right side LCD digits are all 0, faders once going up and down, no more reaction for pressing any button.
If somebody have results after reading atmega32 (MCU PRO Cpu v3.0.0.) and programing new one with TL866A programer please asnwer or email: mladshi @ gmail.com
Thank You so Much!
George
Rebuplic of Georgia
Need service manual for Mackie MCU Pro , Power switch had bad contact, and +7.5v from power supply was jumping up and down, so MCU PRO Cpu v3.0.0 was faulty, now we get new CPU? but system starts. right side LCD digits are all 0, faders once going up and down, no more reaction for pressing any button.
If somebody have results after reading atmega32 (MCU PRO Cpu v3.0.0.) and programing new one with TL866A programer please asnwer or email: mladshi @ gmail.com
Thank You so Much!
George
Rebuplic of Georgia