Tweet
Hi all, I’m really hoping someone can help me please.
I picked up a new
unused (or at least it looks brand new), ddx3216.
I fitted a new power socket as the Origional had a pin missing, so at least it powers up now. The problem is, after the ‘DDX’ splash screen on start-up, I it displays ‘memory test’ fault.
Ive opened up the desk to check for loose connectors etc, and all are reseating ok.
I have tried to restore to factory settings but this does nothing.
I have read about re-flashing the chips with the Behringer firmware update tool, but it cannot find the DDX on the com ports.
Any help would be most welcome and appreciated.
I picked up a new
unused (or at least it looks brand new), ddx3216.
I fitted a new power socket as the Origional had a pin missing, so at least it powers up now. The problem is, after the ‘DDX’ splash screen on start-up, I it displays ‘memory test’ fault.
Ive opened up the desk to check for loose connectors etc, and all are reseating ok.
I have tried to restore to factory settings but this does nothing.
I have read about re-flashing the chips with the Behringer firmware update tool, but it cannot find the DDX on the com ports.
Any help would be most welcome and appreciated.