Search:

Type: Posts; User: big_teee; Keyword(s):

Page 1 of 18 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    33
    Views
    2,530

    Thinking about another Samsung 860EVO 1TB. Best...

    Thinking about another Samsung 860EVO 1TB.
    Best Buy, has some refurb certified....
  2. I would be more concerned with what they sound...

    I would be more concerned with what they sound like, instead of how many mv they read.
    I've wound a lot of the double screw bobbin pickups, and one of my favorite sets, is in my LH import Les Paul....
  3. If you have a humbucker route, then I would put a...

    If you have a humbucker route, then I would put a humbucker in it, no hum!
    Or, give me your bobbin dimensions, and I will work something up for you.
    Bobbin core
    Length
    width
    height
    flange...
  4. Replies
    10
    Views
    565

    Don't overlook the Vintage Magnets. Some of the...

    Don't overlook the Vintage Magnets.
    Some of the old Fender Pickups, had the great sounding Magnets.
    T
  5. Replies
    37
    Views
    7,964

    Sticky: I would like update bobbin measurements of...

    I would like update bobbin measurements of various P-90 bobbins.
    I especially want the common 50mm bobbin dimensions everyone sells.
    I also want the older Gibson vintage bobbin specs.
    Bobbin...
  6. Here are some estimated P-90 bobbins with...

    Here are some estimated P-90 bobbins with different size wire, for comparison.
    Demonstrating the amount of turns for 38, 40, 41, 42, & 43 AWG Single Poly wire.
    Looking at the bottom of each table...
  7. That should work. Another mod I would make is a...

    That should work.
    Another mod I would make is a plate for the outside of the bobbin.
    A thin piece of metel or a piece of plexi glass.
    Use screws to go through the pole screw holes of the P90...
  8. Welcome to the forum. I started winding with a...

    Welcome to the forum.
    I started winding with a Dewalt battery powered electric drill.
    It was a half inch drill.
    I chucked a cutoff half inch shoulder bolt in the drill.
    I had the head machined...
  9. Replies
    15
    Views
    707

    I like the Hell out of that! Good Job, Andrew! T

    I like the Hell out of that!
    Good Job, Andrew!
    T
  10. Replies
    8
    Views
    292

    That's why I quit winding pickups for the public....

    That's why I quit winding pickups for the public.
    I still make my own, and take care of some friends, pro type regional players.
    People want one off pickups, for china prices, and I can never...
  11. Replies
    10
    Views
    557

    Here you go. A typical Strat 6 string neck...

    Here you go.

    A typical Strat 6 string neck Single Coil, has around 7800-7900 turns, and reads around 5.8-5.9k dcr.
    Your pickup will be 7200-7400 turns, per bobbin, due to the length, and height...
  12. Replies
    10
    Views
    557

    I'm interested also, but that would need to go in...

    I'm interested also, but that would need to go in a new thread here.
    https://music-electronics-forum.com/forumdisplay.php?f=18
    Thanks,
    T
  13. Replies
    10
    Views
    557

    Here's calculations of the stacked neck pickup....

    Here's calculations of the stacked neck pickup.
    Max somewhere around 9000 turns.

    On your coils that read no resistance, you must have a broke wire.
    T
  14. Replies
    10
    Views
    557

    First the Humbucker. You should be able to go up...

    First the Humbucker.
    You should be able to go up to 9000 turns, on these, maybe a bit more.
    Here are two different examples.
    If you see any errors, let me know.
    T
  15. Replies
    10
    Views
    557

    I don't see the bobbin height. The bobbin height...

    I don't see the bobbin height.
    The bobbin height is the area between the flange flats.
    usually ranging from .25-.5 inches.
    L, W, H, Flange
    T
  16. Replies
    10
    Views
    557

    The bobbin turns can be calculated. This is a...

    The bobbin turns can be calculated.
    This is a typical 7 string bobbin. (see below).
    To calculate your custom bobbins, I need the length, width, height, flange.
    I need those dimensions in inches,...
  17. Replies
    104
    Views
    7,659

    I think Mark needs to make a separate thread with...

    I think Mark needs to make a separate thread with his product info in the plug your products.
    Leave the pricing in the Flea Market.
    T
  18. Replies
    104
    Views
    7,659

    I have no more info, but this observation....

    I have no more info, but this observation.
    Members have a member status.
    The members with limited permissions, are Junior Members.
    The only way that I know to change that status to a higher status...
  19. Replies
    122
    Views
    19,482

    Sticky: A lot of the part suppliers are listed here....

    A lot of the part suppliers are listed here.
    https://music-electronics-forum.com/showthread.php?t=30228
    T
  20. Replies
    10
    Views
    371

    What if, you use a rubber adjustable stamp? What...

    What if, you use a rubber adjustable stamp?
    What if you use some permanent stamp pad ink for the stamp?
    This one came up when searched.
    https://www.rubberstampchamp.com/products/stazon-inkpad/...
  21. Glad you got it hashed out. Yes, speeding up the...

    Glad you got it hashed out.
    Yes, speeding up the winder when feeding by hand, can give a higher tpl.
    I also feed the wire by hand, I just use my fingers.
    You can try feeding the wire through...
  22. Yep, by winding the bobbin upside down you...

    Yep, by winding the bobbin upside down you reversed the direction.
    When you flipped it over, you now have to wire one start to one finish lead.
    Not just tie the two finish leads together.
    That...
  23. You probably have that pickup polarity wired...

    You probably have that pickup polarity wired wrong.
    T
  24. Here's some calculated data for full sized blade...

    Here's some calculated data for full sized blade pickups.
    Check to see if your bobbins are the same dimensions as these.
    Data for 42, 43, and 44 single poly wire.
    The 44SPN bridge version with a...
  25. If a regular humbucker magnet is not wide enough,...

    If a regular humbucker magnet is not wide enough, and there is a gap on one side or the other?
    In that case you can use a steel shim, or steel wire, to take up the gap.
    I've run into that before on...
  26. Some pictures might help us see what you're doing...

    Some pictures might help us see what you're doing with the rails?
    Also, it is not uncommon to have to drop the neck pickup down some, and raise the height of the bridge pickup.
    On the turns, a lot...
  27. I wouldn't refinish it. I would instead trade it...

    I wouldn't refinish it.
    I would instead trade it for a reissue that has the nitro finish.
    GL,
    T
  28. Replies
    10
    Views
    3,301

    Here is a pretty good comparison video of Ubuntu...

    Here is a pretty good comparison video of Ubuntu 19.04 vs Fedora 30.
    Though his english is a little rough, I agree with most of his results.
    I use a variation of Ubuntu Gnome, and the stock Fedora...
Results 1 to 28 of 500
Page 1 of 18 1 2 3 4