Search:

Type: Posts; User: Mick Bailey; Keyword(s):

Page 1 of 18 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    10
    Views
    120

    Do you know if they're wound on a paper wrap over...

    Do you know if they're wound on a paper wrap over the core?
  2. Replies
    10
    Views
    120

    I'd be wanting to take the end bells off to take...

    I'd be wanting to take the end bells off to take a look at the construction and potential failure mode. Its a poor situation that a relatively modern Fender transformer would be able to short to the...
  3. They sometimes have way more tension than I like....

    They sometimes have way more tension than I like. I gently pull upwards on the cap with the tube removed to 'excercise' and stretch the spring just a little. Don't overdo it otherwise it will be too...
  4. Replies
    13
    Views
    213

    Doesn't D1 clamp R4 voltage to 0.7v?

    Doesn't D1 clamp R4 voltage to 0.7v?
  5. For me, I'd install a MOSFET B+ dropper and that...

    For me, I'd install a MOSFET B+ dropper and that would take care of the rest of the voltages at the same time and give the whole amp an easier life. You can tailor exactly the right B+ you want.
  6. I don't see your plate voltage in the screen...

    I don't see your plate voltage in the screen shot. Try the Weber bias calculator and see if that ties in. I plugged in your original B+ and the rest of your values and it does look rather high at...
  7. Replies
    4
    Views
    178

    That's the one I have. I got it maybe when they...

    That's the one I have. I got it maybe when they first became available in the UK and wasn't expecting much but I've been really pleased with the performance. Mine originally had a heat-resistant...
  8. Replies
    11
    Views
    208

    A few years ago I was in a research post and lead...

    A few years ago I was in a research post and lead officer assessing the likely impact of Avian Influenza, which was seen at the time as as having a high likelihood of becoming a pandemic with high...
  9. Replies
    11
    Views
    208

    There's no way of knowing though how many people...

    There's no way of knowing though how many people have become infected, but show only mild symptoms and don't seek medical assistance. It could take a longer time to establish the true mortality rate...
  10. Replies
    11
    Views
    208

    The deaths numbers though are skewed by the...

    The deaths numbers though are skewed by the underlying mortality rate of the population group. That is, those people who would have died anyhow. The death rate in China is roughly 7.5 people per 1000...
  11. Replies
    24
    Views
    1,153

    One of the crap jobs is to remove a 3PDT switch...

    One of the crap jobs is to remove a 3PDT switch that's a press-fit in a double sided PCB before being soldered in with unleaded.
  12. Replies
    9
    Views
    167

    My thought with repairing an amp is to repair it,...

    My thought with repairing an amp is to repair it, not modify it along the way. Say you add capacitance and the rectifier fails - then you don't know if the added capacitance stressed the rectifier,...
  13. I wouldn't replace a component with one of a...

    I wouldn't replace a component with one of a different value just because it maybe looks wrong as the amp could have been running with this value for decades. If it's in a dropper string then 22k...
  14. Replies
    9
    Views
    167

    Sorry - I transposed the digits - I;ve edited my...

    Sorry - I transposed the digits - I;ve edited my post and the part you've quoted is correct.

    Set your DMM to diode mode as a more reliable way to test the transistor;
    ...
  15. Can you post some pictures of the adapter and...

    Can you post some pictures of the adapter and lead? A tingle is normal with an ungrounded Macbook, but a shock or tripping of the breaker is not normal at all. The problem with aftermarket power...
  16. I'm not clear - do you have two different...

    I'm not clear - do you have two different adaptors? you mentioned magsafe (macsafe) as well as a no-brand replacement.

    When you said you used the Magsafe adapter with a 3-pin outlet, did you use...
  17. Replies
    9
    Views
    167

    Dave Green at Ashdown recommends replacing the...

    Dave Green at Ashdown recommends replacing the 2SA1695 with 2SA1294, and the 2SC4468 with 2SC3263 in these amps whenever the originals short. While the amp is without its output transistors it's also...
  18. Replies
    5
    Views
    5,488

    His last activity here was in 2013, so he's...

    His last activity here was in 2013, so he's perhaps unlikely to see your request. Maybe try a P.M. and see if that gets to him.
  19. Is your power supply a genuine Magsafe? If not,...

    Is your power supply a genuine Magsafe? If not, what is it?
  20. Why not relocate the FET to the grid?

    Why not relocate the FET to the grid?
  21. I use something similar called Tectyl to prevent...

    I use something similar called Tectyl to prevent winter salt corrosion on cars and bikes, and some other outdoor stuff prone to rain exposure or workshop equipment subject to condensation.
  22. Replies
    3
    Views
    103

    Check the screw terminals on the boards - they...

    Check the screw terminals on the boards - they come loose after a while. The input and output level pots get really flaky - check these. A fried transistor stays fried and won't cut in or out with...
  23. I don't like silicone grease near contacts. It...

    I don't like silicone grease near contacts. It migrates, causes problems with resoldering and can prevent non-wiping contacts (such as found in rocker switches) from making contact. I prefer RS...
  24. CTS pots use a lot of interchangeable parts and...

    CTS pots use a lot of interchangeable parts and are easy to fix and service. I regularly rebuild them and swap donor parts from other pots to keep them going. So, yes - we need to know what's wrong...
  25. If you have some household ammonia you can dilute...

    If you have some household ammonia you can dilute it a little and use a q-tip to see if it removes the discolouration. If it does I'll bet the contacts are silver plated.
  26. It looks like silver sulphide, which initially...

    It looks like silver sulphide, which initially forms a yellow and blue rainbow-type discoloration and then eventually turns black. Note that the areas around the solder joins are protected with flux...
  27. Replies
    17
    Views
    337

    That's what I referred to as well.

    That's what I referred to as well.
  28. I've used RTV and it works fine. Even a thin...

    I've used RTV and it works fine. Even a thin piece of card or plastic wedged in if the gap is large - anything to stop the transducer from moving. It also can give can give an improvement in the...
Results 1 to 28 of 500
Page 1 of 18 1 2 3 4