Search:

Type: Posts; User: Enzo; Keyword(s):

Page 1 of 18 1 2 3 4

Search: Search took 0.12 seconds.

  1. Replies
    4
    Views
    36

    OK, well check the neg end for resistance to...

    OK, well check the neg end for resistance to ground. Is it shorted to ground somehow? I had a guy once bring me a unit he had recapped. He forgot to trim the excess lead wires off one of the...
  2. Thread: Korg Keybed felts

    by Enzo
    Replies
    4
    Views
    111

    Google piano felts. I just did, and first thing...

    Google piano felts. I just did, and first thing I found was this:
    https://www.howardpianoindustries.com/felt-cloth-leather-parts/

    Just one of many...
  3. Replies
    4
    Views
    36

    Your new trace showed continuity for its original...

    Your new trace showed continuity for its original path, but perhaps it has gained continuity to some other adjacent trace where it ought not be?

    C38 is the filter cap for the bias supply. That is...
  4. Replies
    21
    Views
    209

    https://en.wikipedia.org/wiki/Stretched_tuning

    https://en.wikipedia.org/wiki/Stretched_tuning
  5. Seriously, look up those old Princeton...

    Seriously, look up those old Princeton schematics, that will show you how Fender drew the circuit. Yours will be very similar.
  6. Replies
    3
    Views
    44

    COuntersink the hole. If you look at commercial...

    COuntersink the hole. If you look at commercial amps, you often see the bolt hole has an indentation in the bottom panel to clear the bolt head. And they use a carriage bolt - the bolt with the...
  7. Agree, the trem was changed to the bias wigle...

    Agree, the trem was changed to the bias wigle type.

    First example I could think of was old Fender Princetons, like AA964 or 6G2.
  8. One of my favorites of those is the Peavey...

    One of my favorites of those is the Peavey Classic 30. And you can see it on the board layout drawing. Over by V1, the input tube, you can see in the traces a bunch of parallel lines in the traces....
  9. A short piece of wire is called a gimmick...

    A short piece of wire is called a gimmick capacitor.

    I remember a Mesa that had a short piece of bare wire soldered to a socket pin. I mean like one inch long. Just bare wire sticking straight...
  10. How is your bias pot wired in? Just making the...

    How is your bias pot wired in? Just making the 100k resistor variable won't do it.

    There is no grid leak bias in this amp. The power tubes are using fixed bias. Adjustable bias is still fixed...
  11. Replies
    7
    Views
    192

    You have a good circuit nearby to compare. SO...

    You have a good circuit nearby to compare. SO all I wanted to know was if the IC output was there or not. It seemed like before you were looking for output at the jacks. 5532 is specified, but if...
  12. Replies
    7
    Views
    192

    NAh, I was worried about 10 or 15v. A few...

    NAh, I was worried about 10 or 15v. A few millivolts won't matter.

    So if you can inject noise into the other AUX drive and hear it, but not here, then teh IC is suspect. First though, monitor...
  13. Replies
    7
    Views
    192

    FX1 send comes through a ribbon from the jack...

    FX1 send comes through a ribbon from the jack board. The signal comes from IC4. So is that working? Touch pin 6 and then pin 2 with a small screwdriver or something to inject hum. Does that come...
  14. Thread: Tascam Porta One

    by Enzo
    Replies
    23
    Views
    6,167

    No, I am just remembering some other unit. The...

    No, I am just remembering some other unit. The transistor was a 2SC916 or something like that. Ignore it, I am leading us down a false path it seems.
  15. Thread: Tascam Porta One

    by Enzo
    Replies
    23
    Views
    6,167

    I forget which model now, but Porta1 was popular...

    I forget which model now, but Porta1 was popular back when. But there was one transistor in the power supply regulator circuit, that screwed to the tape transport frame as a heat sink. There was a...
  16. Replies
    26
    Views
    385

    SP = solder post, or something like that. Look...

    SP = solder post, or something like that. Look at the schematic, they are simply places on the board to connect the wires from the choke, which is not on the board itself. Look at the parts layout...
  17. Replies
    6
    Views
    138

    My concern is not for the impedance. We all know...

    My concern is not for the impedance. We all know we can get away with being off one notch. My concern lies in the tube bias. The transistors biasing the cathodes might get confused. Think cathode...
  18. Yes indeed. and that is why military and similar...

    Yes indeed. and that is why military and similar use 400Hz instead of 60Hz. And I suppose ultimately that is why we use SMPS with frequencies as high as MHz.
  19. Replies
    43
    Views
    845

    V means vertical. OEMs can specify lead...

    V means vertical. OEMs can specify lead configuration. Like TDA7293 or TDA2050 cone in H and V versions. V versions have the two rows of legs bent to the thing stands up on the board. The H...
  20. Helmholtz. It was just a joke. I was implying...

    Helmholtz. It was just a joke. I was implying the line from the movie SPinal Tap, where all their amps "go to eleven... Well that's one louder, innit?" ("innit" being the written form of "isn't...
  21. Replies
    1
    Views
    68

    exchange places with the power tubes. Now does...

    exchange places with the power tubes. Now does teh same tube red plate in its new socket? Or does the other tube now red plate in this socket? Or put another way, does that excessive 1640mv move...
  22. Replies
    26
    Views
    385

    wire across it. Because the current...

    wire across it.



    Because the current through the 1 ohm resistor is causing a voltage across the resistor - Ohm's Law - so you measure in VOLTS. Since the current and voltage will be the same...
  23. Replies
    26
    Views
    385

    You measure the bias voltage at the tube grid. ...

    You measure the bias voltage at the tube grid. If the pot turns that voltage up and down, the pot works.

    Do I have this right? You put new power tubes in it, and found 119mv on the TP. Then you...
  24. Replies
    43
    Views
    845

    R110/116 are not there as a voltage divider per...

    R110/116 are not there as a voltage divider per se, they are bleeder/balance resistors for the stacked filter caps, C110/115. The resistors make sure the voltage is equally shared between the two...
  25. I think that is the problem. Over here we have...

    I think that is the problem. Over here we have 60Hz, which is like 10 more Hertz, innit?
  26. Replies
    10
    Views
    389

    Well, they are commonly used terms in the...

    Well, they are commonly used terms in the industry. And I bet now that you know them, you won't forget. W for wire. Some draftsmen use J for jumper. Oh yes, the Brits call them links. Usually...
  27. Replies
    26
    Views
    385

    Look at your schematic. The bias test point is a...

    Look at your schematic. The bias test point is a one ohm resistor from power tube cathodes to ground. The beauty of one ohm is that in Ohm's Law, it means voltage and current are the same.. In...
  28. Replies
    26
    Views
    385

    No. Higher current means higher current. They...

    No. Higher current means higher current. They are running hotter. Current times voltage is power. So if you had say 450v on the plates, and 60ma, then 450 x 0.06 = 27 watts for two tubes. ...
Results 1 to 28 of 500
Page 1 of 18 1 2 3 4