Search:

Type: Posts; User: the great waldo; Keyword(s):

Page 1 of 18 1 2 3 4

Search: Search took 0.02 seconds.

  1. I've never seen a grey top (in 45 years being in...

    I've never seen a grey top (in 45 years being in the guitar making /repairing business) However the wire leads and the small hole on the baseplate look right. A side view would be good. A lot of...
  2. Thanks I've got the schematic. I've tried 2 sets...

    Thanks I've got the schematic. I've tried 2 sets of Valves still hummed (It's a hum similar to putting your thumb on the jack plug whilst having the amp turned full up) I'll check the screen...
  3. Yup I checked that. I was wondering if a blown...

    Yup I checked that. I was wondering if a blown output transformer would make such a loud hum. If so I would check it with my meter. These amps are really poorly put together. I'v 2 old bandmasters...
  4. I've ordered some new ft filter caps, but I don't...

    I've ordered some new ft filter caps, but I don't think the caps are suspect as the hum normally isn't that high. I'm getting no audio signal through at all from the input.
  5. Hot rod deluxe Loud hum when standby switched on problem

    I've got an old Made in USA hot rod deluxe which has a very loud hum when the standby is switched on. None of the controls make any difference. It just makes a loud hum and nothing else. I had a...
  6. Replies
    9
    Views
    416

    Thanks for that Tony. It's a nice design and...

    Thanks for that Tony. It's a nice design and great price. I'm definitely up for one.
    Cheers
    Andrew
  7. Replies
    9
    Views
    416

    Hi Tony Thanks. Any chance of a photo of the...

    Hi Tony

    Thanks. Any chance of a photo of the handpiece just to get a rough idea what to look for ?

    Cheers
    Andrew
  8. Replies
    9
    Views
    416

    Hi Tony what kind of engraver setup are you...

    Hi Tony what kind of engraver setup are you using? You make it look so easy.
    Cheers
    Andrew
  9. Hello Brian Two things, Firstly if you are going...

    Hello Brian
    Two things, Firstly if you are going to use that bar to guide the wire make sure it's completely smooth and polished as it could be damaging the wire. Secondly try and raise the guide...
  10. Replies
    29
    Views
    1,863

    Thanks Terry That link didn't want to download...

    Thanks Terry
    That link didn't want to download directly for some reason but I used J downloader and it came through fine.
    Cheers
    Andrew
  11. Replies
    29
    Views
    1,863

    Hi T Happy new year and hope all is well. The...

    Hi T
    Happy new year and hope all is well. The first link is dead, I just thought i'd mention it.
    Cheers
    Andrew
  12. Replies
    17
    Views
    1,362

    Something like this should do you. ...

    Something like this should do you.
    ...
  13. Replies
    25
    Views
    3,671

    Hi Klaus Anything new on the meter ? Cheers...

    Hi Klaus

    Anything new on the meter ?

    Cheers
    Andrew
  14. Replies
    6
    Views
    687

    Have you tried...

    Have you tried https://www.wdmusic.com/search.html?q=springs

    Cheeers
    Andrew
  15. Replies
    6
    Views
    1,111

    Hello Possum Get this stuff ...

    Hello Possum

    Get this stuff
    https://www.toolsintl.jp/en/product/rinrei_washi.html
    It`s exactly the same as the Toyo tape, I just can't for the life of me think of where I got it from ! Getting...
  16. Replies
    26
    Views
    3,171

    Hi Christoph I got the mail, thank you. I...

    Hi Christoph

    I got the mail, thank you. I tried to reply to your pm but it somehow didn't work. Anyway thanks again.

    Lg, Andrew
  17. Replies
    26
    Views
    3,171

    Hi Christoph I would like to see that mail...

    Hi Christoph

    I would like to see that mail just out of interest.
    Lg.

    Andrew
  18. Replies
    26
    Views
    3,171

    Servus Christoph Thanks for your time. I...

    Servus Christoph

    Thanks for your time. I figured Elektrisola wern't interested. It's strange that a company that produces a product is not willing to supply to a certain region. I would have...
  19. Replies
    2
    Views
    1,364

    I think if you check out the tanac website you...

    I think if you check out the tanac website you should find instuctions for the originals which I assume the chinese copied.
    Cheers
    Andrew

    addon They are made by TNK now
  20. Replies
    25
    Views
    3,671

    HI Claus Anything new on the measuring device...

    HI Claus

    Anything new on the measuring device ?
    Have a good weekend.
    Cheers
    Andrew
  21. Replies
    26
    Views
    3,171

    Hi Christoph If you get a chance can you ask...

    Hi Christoph

    If you get a chance can you ask Electrisola if they stock plain enamel and or heavy formvar. I got sent to their Swiss site, got no replies to my emails, and just get a reminder every...
  22. Replies
    26
    Views
    3,171

    Hi Christoph I've wound it with 44awg 0.050mm...

    Hi Christoph

    I've wound it with 44awg 0.050mm single enamel 5200 turns = 7.25 k ohms I wound some humbucker paper tape around the former (helps to get coil off without damage) and vacuum waxed....
  23. Replies
    26
    Views
    3,171

    Hello Christoph Great minds think alike !! ...

    Hello Christoph

    Great minds think alike !!

    Lg.
    Andrew
  24. I'm not sure about the thread in the hole. I've...

    I'm not sure about the thread in the hole. I've just had a look at a 1974 grey bobbin strat pup that i've got here and there's no sign of a thread in the middle hole (the pups pretty knackered but...
  25. Replies
    26
    Views
    3,171

    Hello Chr,Istian? Look forward to seeing it ....

    Hello Chr,Istian?
    Look forward to seeing it .
    Cheers
    Andrew
  26. Replies
    26
    Views
    3,171

    Hi Terry Thanks. I'll be trying it out this...

    Hi Terry

    Thanks. I'll be trying it out this week. I did try a version with a solid centre piece but it was virtually impossible to get the coil off without damaging it. With this system you just...
  27. Replies
    26
    Views
    3,171

    Here's a photo of my updated 54250bobbinless...

    Here's a photo of my updated 54250bobbinless bobbin. Cheers Andrew By the way I will be chamfering the edges!
  28. Replies
    26
    Views
    3,171

    Hi Magnut I knocked up a circular bobbin form...

    Hi Magnut
    I knocked up a circular bobbin form out of Acrylic yesterday with some screw on flanges, (although my brain is telling me after a nights sleep it might be better to make the core...
Results 1 to 28 of 500
Page 1 of 18 1 2 3 4