Search:

Type: Posts; User: Helmholtz; Keyword(s):

Page 1 of 18 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    17
    Views
    294

    Good idea! Screen stoppers produce some...

    Good idea!

    Screen stoppers produce some automatic screen compression at higher output level.
    It's an instantaneous compression that causes soft clipping and distortion.
  2. Thanks for helping me realize my mistake. I...

    Thanks for helping me realize my mistake. I should have known better.
  3. Don't know :sad:. Is is a musical interval? ...

    Don't know :sad:. Is is a musical interval?

    And you got me again (being careless). Octaves evolve as 2^N. Apologies.
  4. I understand that the finite stiffness of the...

    I understand that the finite stiffness of the strings causes overtones to increasingly sound sharp with higher order. My main source for this kind of stuff (and much more) is Prof. Zollner's book...
  5. I don't think resistor power is a concern here....

    I don't think resistor power is a concern here. 300V across a 10M resistor or 2kV across a 100M resistor can't be a power issue. Rather these are safety limits regarding isolation, creepage and...
  6. Sorry, you're right, only even order harmonics...

    Sorry, you're right, only even order harmonics are octaves. Nevertheless I think that the main reason for dissonance is equal temper tuning and intermodulation as well as the fact that e.g. string...
  7. Completely agree. Real harmonics can't be...

    Completely agree.



    Real harmonics can't be dissonant by definition as they are just octaves of harmonic No.1 = fundamental. Of course intermodulation products of not harmonically related...
  8. Replies
    17
    Views
    294

    Single ended amps require better plate and screen...

    Single ended amps require better plate and screen supply filtering than PP amps.
  9. Replies
    17
    Views
    294

    Schematic shows a 100 Ohm sag resistor. But it...

    Schematic shows a 100 Ohm sag resistor. But it won't have much dynamic effect with a class A output stage as average power/current consumption is more or less constant.
  10. As others already said, there shouldn't be a...

    As others already said, there shouldn't be a problem with connecting an 8 Ohm speaker to the 4 Ohm min output. It is certainly no OT issue. In fact the 8 Ohm load means lower primary and secondary...
  11. Replies
    65
    Views
    1,483

    Oh boy, so many strange fractional measures. As...

    Oh boy, so many strange fractional measures. As far as I know (and measured) original vintage strat string spacing (55.6mm) never changed (unfortunately the neck/fretboard widths did). Means that the...
  12. Replies
    65
    Views
    1,483

    Well, it was you who introduced the term file...

    Well, it was you who introduced the term file "bite". In posts 50/55 I meant to say that a sharp file has no effect on my '62 and Fender Vintage saddles other than dulling the file - completely...
  13. Replies
    65
    Views
    1,483

    This is exactly why many aftermarket saddles need...

    This is exactly why many aftermarket saddles need to be ground to fit vintage strat fretboards.
  14. The voltage divider R72/73 takes care that with...

    The voltage divider R72/73 takes care that with good caps the DCV across C34 is 50% of the voltage at point Z, i.e. about 240VDC. If it's much lower C34 is leaky and must be replaced. What is the Z...
  15. Replies
    65
    Views
    1,483

    If you still have them, you might try the file...

    If you still have them, you might try the file test.



    May not really matter here, but MIM bridges and saddles have just above/close to vintage string spacings, but I don't like the cast zinc...
  16. What I implied was that "export" PTs used at 50Hz...

    What I implied was that "export" PTs used at 50Hz can can be expected to get warmer than with 60Hz.
  17. Replies
    65
    Views
    1,483

    Then try the Fender Vintage parts. BTW, over...

    Then try the Fender Vintage parts.

    BTW, over the decades I tried and collected many different makes including "Pure Vintage" and KTS titanium saddles. The most annoying problem I find with most...
  18. Replies
    65
    Views
    1,483

    My '62 saddles as well as the contemporary Fender...

    My '62 saddles as well as the contemporary Fender Vintage Replacement saddles do not "bite" at all (I thought I was clear on that). The latter changed over the years (I have samples dating back to...
  19. Thanks for explanation, Enzo. Don't forget we...

    Thanks for explanation, Enzo. Don't forget we have much more line volts in 50Hz countries :)

    Actually there are some advantages of a higher line frequency, e.g. PTs have less core losses and thus...
  20. Replies
    65
    Views
    1,483

    ??? From literature I know about steel...

    ???

    From literature I know about steel hardening methods. Even did a vacation job in spring hardening when at school.
    I assume the harder '62 saddles and the Fender Vintage Replacement saddles...
  21. Replies
    65
    Views
    1,483

    Always experimenting. I prefer to rely on my own...

    Always experimenting. I prefer to rely on my own observations. With saddles I try a small file and/or see how easy they bend, carefully using a vise. Or compare indents from an automatic center...
  22. Thread: Cleaning PCB

    by Helmholtz
    Replies
    11
    Views
    269

    I am not familiar with water soluble flux and...

    I am not familiar with water soluble flux and just learned that it must be completely washed off because residues are corrosive
    (so I wouldn't use it in electronics):
    ...
  23. Replies
    65
    Views
    1,483

    Saddles don't change "bass" (low frequency...

    Saddles don't change "bass" (low frequency fundamental frequency) response.

    In 2005 I bought 3 complete Callaham vibrato bridges + some extra saddles and hardware. I noticed that the saddles and...
  24. So what's the point?

    So what's the point?
  25. Replies
    21
    Views
    500

    To me it seems clear that these speakers are not...

    To me it seems clear that these speakers are not original/ OEM. They don't have the Jensen frame code and everything looks too new. Jensen and Oxford ceramics from the era had black frames and...
  26. In my experience the AC30 humdinger is very...

    In my experience the AC30 humdinger is very effective regarding compensation of 50Hz hum. The position of minimum 50Hz hum may not provide optimum cancellation of more audible higher line harmonics,...
  27. Replies
    21
    Views
    500

    How do they sound?

    How do they sound?
  28. How this? What's the difference (language...

    How this? What's the difference (language barrier)? What would be a real hum balance?
Results 1 to 28 of 500
Page 1 of 18 1 2 3 4