Ok so i have two bass amp heads that i use, a Warwick 3.2 Pro Fet bass head, and an Ashdown Superfly 1000.
Both amps have very different tonal...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
19 results in 0.0059 seconds.
Keywords
Members
Tags
-
Amp switcher box, multiple amps going to one (or two) cab
-
Amp switcher box, multiple amps going to one (or two) cab
Ok so i have two bass amp heads that i use, a Warwick 3.2 Pro Fet beas head, and an Ashdown Superfly 1000
Both amps have very different tonal...
-
OK another update.
Whist testing the diodes with the battery voltage running throught the circuit, and the multimeter set to the diode function,all...Last edited by Skywalker83; 01-10-2009, 06:23 PM.
-
was just doing some more tests, and somethings came up that i wanted to ask about.
I was taking a measurement across the input and output (shown...Last edited by Skywalker83; 01-10-2009, 06:26 PM.
Leave a comment:
-
Something else i just tried which shows me that some aspect of the pedal is working is, i tried doint a hard reset (where you would reset all the factory...
Leave a comment:
-
Yeah i get A.
i get a reading of about 700 in a forward direction and "OL" or a "1" in the case of my multimeter.
Leave a comment:
-
ok, after reading a couple of articles about diode reading, acording to the readings i get the diode is fine. I've also measured reading across other various...
Leave a comment:
-
Ok i've just tested the diode, i get a reading of 700, when the multimeter is set to the diode measurement.
What does this mean?
Leave a comment:
-
-
Do popped diodes give off a funny smell?
Also do you know what type of diode this is?
Leave a comment:
-
yes there appears to be a diode that is around the power input area of the circuit. (see pic)
Tomorrow i will go over the circuit...
Leave a comment:
-
Think i've just fried my Zoom B2
Ok, so i went to pick up my pedal i bought off ebay. Got it home and plugged it in. i used a travel adapter to convert the American plug to European. Switched...
-
ok i've re-done the schematic (again).
i want the input op amp stage confugured so i can adjust the input gain via trim pot.
...
Leave a comment:
-
Thanks for your reply.
I think you may have missunderstood the diagrams slightly.
Each pickup doesn't have its own volume.But each...
Leave a comment:
-
Bass preamp design, crit and comments please!!
Oh , here are the 2 schematics for the active and passive circuits for my onboard bass preamp and EQ i'm designing. Feedback welcome people.
...
-
John East Preamp Clone
Ok i want to make a clone of the John east 5 knob deluxe pre amp and EQ for my bass. But i'm a bit stuck on coming up with a schematic for it. and working...
-
Yeah i reckon i have enough space, i might need to use some slightly slimmer knobs for a couple of the pots, but it should all fit. I was going to use a blend...
Leave a comment:
-
The set up i would want would be
Tone - for both Passive and Active
Treble - Active
Mid/Mid Sweep - Stacked pot- Active
...
Leave a comment:
-
On board Bass preamp
I'm looking for a schematic for a D.I.Y onboard preamp for a passive bass guitar. My bass currently has 2 vol (2 x soapbars) and 1 tone control. I'd like...
Leave a comment: