Announcement
Collapse
No announcement yet.
Search Result
Collapse
93 results in 0.0107 seconds.
Keywords
Members
Tags
-
Sorry. I really don't know what the wiring is for the pedal. I don't have one. Tempestplayer had one so he might be able to help.
-
Thanks Enzo. I kind of figured that by looking at the datasheet a little harder but just wasn't 100% sure. I don't really know much about transformers. The...
Leave a comment:
-
Sorry. Datasheet http://www.mouser.com/ds/2/449/XC-600134-205894.pdf
Doesn't really say much about it.
Leave a comment:
-
Xicon 42TM018 transformer question
I'm building a pedal that is using the Xicon 42TM018 transformer. Looking at the space issues I'm having I'm wondering if I couldn't put the transformer on...
-
Just wanted to follow up on how this project is going.
I actually went with Enzo's LED/LDR idea. It's working really well. I have a little darkness...
Leave a comment:
-
Ahhhh. I thought I was just not doing something right. Does anyone have the Rebel 30 schematic they could link remotely or email me?
I'm going to try...
Leave a comment:
-
How come I just get a blank page when I try to view the pdf? I can't right-click and save file as either. I just get a gif image with the name clear.
...
Leave a comment:
-
Thank you. Do you think a 9v relay should have a resistor or something on the V+ just to drop it down a little since a fresh 9v battery or a 9v power supply...
Leave a comment:
-
I actually have a few of the snap action switches I've pulled from things over the years. I'll have to give one a try to see how it works out.
I think...
Leave a comment:
-
Thanks Enzo. I was actually just looking at those lever switches. I got the relays today and the ones I ordered "turn on" at about 5v and they all...Last edited by Bloodbath; 02-08-2013, 12:25 AM.
Leave a comment:
-
Enzo, I understand and thank you for the suggestion of not using a pressure switch. The more I think about it, your right, it just isn't a good idea. I have...
Leave a comment:
-
Yeah, you are probably right. I have some samples coming of some sensitive pressure pads (only require 2-20lbs of pressure) to mess around with but I probably...
Leave a comment:
-
Thanks. I kind of figured. I am interested in any other ideas for doing this though. The relay just seems the easiest/simplest.
Leave a comment:
-
I've seen pressure plates/pads as Sparkfun or Adafruit and have always wanted to do a project with something like that. I've only seen a resistive pad. Are...
Leave a comment:
-
I'm certainly open to other switching. The most important part is that I need the a momentary spst switch to activate it.
The circuit is for a wah...Last edited by Bloodbath; 01-30-2013, 11:21 PM.
Leave a comment:
-
Thanks guys. I haven't picked out a relay yet as I'm not 100% sure what is needed yet. Not really sure why I picked 5v. I guess I just didn't want to pick...
Leave a comment:
-
Using a 5v relay as a momentary switch
My basic need is to actuate a 5v DPDT relay with a spst momentary switch so when the spst is pressed, the relay is in one state and when the spst is let go...
-
I was thinking something as simple as this would work: Modulated Big Muff Tonestack using 2 LED/LDR combos and an LFO
Leave a comment:
-
I just need to be pointed in the right direction. Basically, if I knew what kind of circuit I needed, I could figure the rest out. Knowing the expression...
Leave a comment:
-
I verified that the only thing the foot pedal does is sweep from 0k to 48.2K using the ring and tip.
The EXP jack on the BSY600 gives off 3v on the...
Leave a comment:
-
Behringer BSY600 CV/FCV100 footpedal modification and/or alternate control circuit
I have a Behringer BSY600 Bass Synthesizer and I use the CV output on the FCV100 foot pedal for the expression pedal control voltage. I believe the expression...Last edited by Bloodbath; 01-18-2012, 03:05 PM.
Leave a comment: