Announcement
Collapse
No announcement yet.
Search Result
Collapse
52 results in 0.0091 seconds.
Keywords
Members
Tags
-
Thanks guys. You answered my question!!!
-
Sorry about that. How about Ba4560 705 HO1 and JRC4560D 706 1G
Let me know if this helps.
Leave a comment:
-
4560 IC chips
I know i dont' post very often but this site has been a wealth of information for me. Thanks!
Can I replace the 6- BA4560 chips in my Peavey with 4560D...
-
Thanks for your help guys! I recently purchased this amp and it plays great! I was hoping to find the schematic for future reference as I plan on keeping...
Leave a comment:
-
Yes, I am positive. Model #BV50H came from rear of amp. I have located the operators manual. Crate has not responded. This is a Blue Voodoo head.
Leave a comment:
-
Looking for Crate bv50h schematic
This is a 50 watt head with 6L6 power tubes convertible to EL34 tubes
-
Still have it!
Yes, I still have it. Great amp and I use it for guitar/bass. No mods were needed other than converting jacks to 1/4"....
Leave a comment:
-
Scott,
No longer have the tubes and didn't take pics. The "7452" and "RCA" were the only print on the tubes. Both were large print....
Leave a comment:
-
Found It!
Thanks guys, you pointed me right to it. I remover the filter caps pan and was going to do a omh check when I notice one cap loose....
Leave a comment:
-
Odd Tube
This amp has been running 2 RCA-7452 power tubes for a few months and I have no data on these tubes. I doubt that these are 6L6 compatible...
Leave a comment:
-
Fender Bassman
I have a 68' Bassman with very low power/volume but with no hum or noise. Has been tested with another set of new, known good tubes. Has two 6L6 tubes, no...
-
I had this same problem on a twin awhile back and spent alot of time on this, and still had the crackle and pop. Finally ended up isolating the output jack...
Leave a comment:
-
Sunn Amp and Cab
I have a Sunn Concert Bass amp head and Sunn 115BH Cab, both in near mint condition. This set is dated 1977 and almost looks new and plays perfect. Amp has...
-
Done!
Started at 10V and worked my way up over a 24hr period. All is well. Thanks! Rayme
Leave a comment:
-
Thanks!
Thanks guys, your info gives me some direction which to go and that is a big help now. We all have to start somewhere. This is a Bogen...
Leave a comment:
-
Using a variac
What is the proper procedure for bringing up a tube amp on a variac, when amp has not been operated for a few years?Is this done over a few hour period?:...
-
Makes sense
That makes sense Brad1. I am in the Columbus, Ohio area and I must agree with you, they do have reasonable prices already. Thanks...
Leave a comment:
-
Buying from music-go-round
Has anyone had any experience buying from music-go-round? They deal in used equipment. Just wondering if their prices are set in stone or can they deal with...
Leave a comment: