4 way switch 2 humbuckers dilema

[the great waldo]

Hi Steve
Here is a photo not of Elmars pup but something similar. Elmar just had neo magnets in the middle. Cheers Andrew...

[the great waldo]

Which Polish supplier?
Cheers
Andrew...

[the great waldo]

By the way the coils were quite wide maybe an inch each side. I'll have a look in the shop to see if there's one in that I can take a photo of.
Cheers...

[the great waldo]

Yes Steve. They were originally designed by a guy here in Vienna who was winding the coils on a flat piece of card so imagine 90 degrees orientation for...

[the great waldo]

Something like this might do ya
https://www.sixtus-pickups.com/shop/

They are very thin.
Cheers
Andrew

[the great waldo]

One of these will do you. There are plenty of different types available on Aliexpress

https://www.aliexpress.com/item/1005002196352153.html?...

[the great waldo]

http://www.extech.com/products/LCR200...

[the great waldo]

I've used mws wire but it was all over the place in diameter, slightly thicker in general.
Andrew

[the great waldo]

I think the op means the nickel colour(steel) braided standard humbucker wire.
Cheers
Andrew

[the great waldo]

Could they be pre reliced bobbins? I'd send them back and ask for replacements, after all they have a reputation to keep!!

Cheers
Andr...

[the great waldo]

Here's another go at posting the photo...

[the great waldo]

Well I got a reply from the pup makers and they were kind enough to send me a working schematic. Cheers Andrew...

[the great waldo]

Possum would be the man to talk to. All his parts are custom made by/for him so he should be able to point you in the right direction. Let us know how you...

[the great waldo]

Hi All
I was just wondering if anyone has got the following to work and if so circuit diagram please.
2 humbuckers + 4 way switch + 1 pushpull...

[the great waldo]

Thanks working now.
Cheerrs
Andrew

[the great waldo]

Takes me here https://music-electronics-forum.com/ too.!!!!
this is what you get when you copy the link https://music-electronics-forum.com/core/...

[the great waldo]

I must say the new forum layout is crap. I really don't know why people keep changing stuff around. Too many red horn rimmed spectacle types around with fast...

[the great waldo]

Just for your information, It's not so easy to remove a k&k system without destroying it as it should be glued onto the top with gel super glue. IT's...

[the great waldo]

Hi Soulfetish

It's no problem drilling the hole for the pickup. You will need a 2 mm and 2.3 mm drill. You need to drill the 2mm hole at an angle...

[the great waldo]

An Lr Baggs Anthem internal system will give you a good acoustic sound with low feedback and no holes in the sides. An Lr baggs vtc element system will give...

[the great waldo]

You could try silver solder in the holes and then retapping. It's going to be a PIA to clean up but should work.

Cheers
Andrew