Mandi,
Unfortunately, I can not upload a dxf or dwg file. Send me a private message; maybe I can email it to you.
That PT at...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
100 results in 0.0124 seconds.
Keywords
Members
Tags
-
Hi Mandi,
I'm glad you like my idea of putting a 5E3 in the Valve Jr. Head. I was really surprised to see this thread pop up again. You must remember...
Leave a comment:
-
Thanks Smitty.
I'll try your suggestion. It does seem counter-intuitive to me to run the cathode ground of the 12AT7 driver tube across the amp to...
Leave a comment:
-
Chuck, I have a 4AB3C1B reverb tank, which has an isolated input, and a grounded output. Reverb pan input load resistor? Which one is that? Rob.
Leave a comment:
-
Thanks for the replies.
I really shouldn't write things "Off the top of my head"; there is not much up there. Yes, I forgot to add that the...
Leave a comment:
-
Thanks for the reply Smitty.
I'm not making a Fender clone, but using the circuits to achieve a simular result. I have been using a "star"...
Leave a comment:
-
Some AB763 Type Reverb Questions
Hi All,
I'm in the planning stages of a modified AB763 type amp (single channel, no vibrato) and need some advice.
1. In the reverb...
-
HBamps-Thanks for the comments. This is a good sounding amp, and alot of fun to play, thanks to the talented and generous people on this forum. This amp has...
Leave a comment:
-
This is why I keep comming back to this forum. You ask a simple question and get an answer as well as some discusion as to why. Thanks for continually advancing...
Leave a comment:
-
J M Fahey: well yes, "Blackfacey" of course; everybody knows that. The AX84 site is very good, lots of creative ideas and good info there....
Leave a comment:
-
We've got to stop meeting like this, Chuck. As you know quite well, I used the split plate load resistors on my last build, following your advice, and...
Leave a comment:
-
Pre Amp to PI connection Question
I thinking of building some thing like this attached drawing; AB763 type single channel with reverb and no vibrato. My question concerns joinning the pre-amp...
-
Doh! I forgot to add the REV5A drawing. I edited my last post to put it in.
Thanks Chuck; yes that is what I am planning to do, just haven't...
Leave a comment:
-
The Green Monster lives! Very nice job. How much does does that weigh installed in the cab? Rob.
Leave a comment:
-
Over 1100 views?! REV5A.
Wow, it's nice to know that this is getting some interest, even though there isn't a lot of comments lately. I hope...
Leave a comment:
-
It turns out that you can order directly from Accutronics in Korea. There is a link for ordering on their web page; payment via Paypal. They quoted $20 for...
Leave a comment:
-
Thanks for the replies.
I am going to be using a fender type reverb circuit, as used on a deluxe reverb ab763. So yes, it is driven with a transformer....
Leave a comment:
-
Well, it seems that the tank I would like to use (8AB2C1B) is nowhere to be found. Could I use one with input and output grounded (8AB2A1B) as is, or modify...
Leave a comment:
-
Thanks for the quick reply. That is good news too. Will the performance of the reverb suffer any because of the slighly higher input impedance? Like if I...
Leave a comment:
-
reverb tank questions
I,m in the planning stages of a new project and need some info on the reverb section. This amp will be based on a deluxe reverb, single channel, no vibrato....
-
Thanks Chuck! Thats very clever, and simple too. I'll have to make one and try it out. Thanks again for continuing to reply to my posts; it's been a big help....
Leave a comment:
Leave a comment: