Announcement
Collapse
No announcement yet.
Search Result
Collapse
13 results in 0.0034 seconds.
Keywords
Members
Tags
-
It works! it really works!!!, but its 11.30 at night here and everyone's in bed!!! so i cant play it very loud at all but its sure does go loud! sounds nice,...
-
I know thanks loudthud, the power was on but I didnt think whether it mattered or not at the time to have the tubes in place(the results i previously posted...Last edited by classyelf; 06-08-2009, 12:30 PM.
Leave a comment:
-
thanks guys, right got some results but they all seem to be very low? - especially as loud thud was saying to discharge the capacitors to a voltage below...
Leave a comment:
-
cool will do loudthud, should I measure the voltage across the component or from the plus side to ground? and which pins should be meaured?
Leave a comment:
-
Some new findings, I was just about to have a look at the amp, and maybe start rewiring it to the triode diagram as i described above and I thought I'd try...
Leave a comment:
-
thanks mbratch, this has already been brought to my attention by loudthud though and I rectified the problem this morning. this fixed the loud hum i was hearing...
Leave a comment:
-
cheers pontiac pete, ill check out me jacks further. No i didnt ground them, there was no mention of this in the diagram? how would one go about grounding...
Leave a comment:
-
Hi guys, got my 100 ohm resistors today and just finished soldering them in place to the indicator light. Fired up the amp after testing pins 4 and 6 of...
Leave a comment:
-
thanx tubeswell, I will do some tidying up and get myself a pair of accurate 100 ohm resistors.
The problem with my transformer wires is...
Leave a comment:
-
cheers loud thud, i'll disconnect and heat shrink the red/blue wire form ground. I've been searching the the whole house high and low for a pair of 100 ohm...
Leave a comment:
-
sorry mandopicker I'm a complete novice to amp building so I didnt understand half of that lol, but if your talking about the rather fat 1meg resistor in...
Leave a comment:
-
cheers loudthud, just did your recommended check and all my readings correspond with yours im afraid so i guess thats not the problem, thanks for your time...
Leave a comment:
-
5e3 build problem
Hi all,
finally my finished my 5e3 kit (from triode electronics but with an extra carling switched wired in using the the ceriatone 5e3 diagram),...
Leave a comment: