Announcement
Collapse
No announcement yet.
Search Result
Collapse
73 results in 0.0138 seconds.
Keywords
Members
Tags
-
I once had a brown face Fender Bassman that had the speaker cab stuffed full of fiberglass insulation.....pink stuff. I'm pretty sure it was original as the...
-
Take a look at this neo speaker. Very lite and spl is good.
Eminence Deltalite II 2512 Neo 12" Driver 290-593
Leave a comment:
-
I can do conjecture!!! I would guess the three way switch would offer the choice of a couple of tone caps much like a gretch and the two extra knobs provided...
Leave a comment:
-
Then, you might check the wiring. being a kit, the wiring might not be correct. Try coming direct off the pickup leads to the amp bypassing all other circuits...
Leave a comment:
-
Might be that the speaker is the problem. some speakers have a hard time getting down to B or are ported such that low E and higher are louder than below...
Leave a comment:
-
Changing to KT 88s won't fix flabby lows. The Pro has an open back cabinet that will tend to cancel anything lower than say 80 Hz. He should instead look...
Leave a comment:
-
I think the black knobby things are tone and volume. I think it attaches by friction with the fretboard and bridge as the contact points from looking at what...
Leave a comment:
-
I would guess that the reason you are not finding anything on-line is because the unit was not popular....I have never seen one like it before but I have...
Leave a comment:
-
These were used to retrofit a magnetic pickup on accoustic guitars....ususally flat tops but I suppose archtops could be done as well. It was Sears version...
Leave a comment:
-
OK OK OK Ok
I like rollerwound stainless but take a look at this it might help out.
Electric Bass Strings, Electric Bass Guitar...
Leave a comment:
-
-
I had one in a SG for years. effect was not too noticable. You could just boost treble frequency from the amp and do the same thing. I took it out eventually....
Leave a comment:
-
I've had a '67 tennessean since '67) Remember that the bridge floats and does not compensate. You must measure the distance from the zero fret / nut each...
Leave a comment:
-
-
A boogie mark anything with an EVM or JBL 12 inch is just what you are looking for.I have a mark 3 with the ev speaker that is just great for just about anything...
Leave a comment:
-
-
Not 16 gauge wire. I'm sure they are spings to mechanically raise, lower the slug magnets.
Leave a comment:
-
-
Premium speaker. Comparable to JBL, EV or Altec. Field replaceable cones and cast frames. High SPL. heavy.
Leave a comment:
-
"As to making those 24VAC pulses convert to iPod, I'd have to say that is about as likely as adding a digital USB interface to your Thanksgiving turkey."...
Leave a comment:
Leave a comment: