The side with the male plug attached is.
I’m not sure the other side is - the side for the ribbon cable with nothing on it.
...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
175 results in 0.0122 seconds.
Keywords
Members
Tags
-
EHX HOG ribbon cable repair
I got this HOG broken - looks like voltage regulator burned up.
the owner took it apart and I’m not sure the term of this ribbon cable...
-
Yeah, the traces are tiny and happened removing the relay which is am easy fix. Thanks for the diagram.
I hooked up the coils on PCB. Can I test...Last edited by beedoola; 12-23-2023, 09:36 PM.
Leave a comment:
-
Someone has been in here and looks like they toasted a connector cable and the traces. Should these relays have 24v on both pin 1 and 16? I'm getting that...4 PhotosLast edited by beedoola; 12-23-2023, 01:57 AM.
Leave a comment:
-
ENGL Powerball 100 channel 2 EQ does not work
I got this amp, looks like maybe someone replaced a relay on the PCB. Can't say for sure but there is some rosin residue on the legs of one. The amp works...
-
Sorry, should have added more:
the pedal passes signal but hitting the footswitch does not engage the delay signal. The bypass LED works with...
Leave a comment:
-
There uses to be a guide somewhere for checking all the PS voltages.
did you try doing a factory reset with the footswitches when powering it...
Leave a comment:
-
Ibanez DDL Digital Delay not working
I can't find a schematic for it but found one for the Flanger of the same type. I've read the FETs that do the switching can fail. I think TR1 on mine may...
-
The Dude abides! That worked. I've owned many a Line DL-4 and often a chip reset has fixed issues and I didn't think to pull the chip. Pulled it - very carefully...
- Likes 3
Leave a comment:
-
All the voltages check on. Used the test points as well as testing the ICs in question. Looks like U5 isn’t part of the production build as I don’t...
Leave a comment:
-
I think I fixed the image issue. Here is the schematic:
https://www.synthxl.com/wp-content/u...G-Schematics.p...
- Likes 1
Leave a comment:
-
Electro Harmonix POG V1 no effect signal
I hadn't used this pedal in awhile and I found my stock EHX power supply was putting out 24v instead of the 18v.
I'm using my Ciocks power supply...Last edited by beedoola; 04-01-2023, 02:46 AM.
-
I meant C2 on the PCB was not included. Not from the schematic shown.
Leave a comment:
-
Thanks for that schematic. I found the 220r that should be coming off the tone wiper was 4.7k. It’s weird if Fulltone did that stock. Could be the pedal...
Leave a comment:
-
-
Fulltone RTO wiring and tone control issue
I got this Robin Trower OD. Previous owner removed the footswitch. I’m a little stumped as there are two leads left - one should be for the LED to the...
-
I actually figured it out.
Basically the 4pdt acts like a channel switching or present for two different Reverb sounds from the Reverb circuit:...
- Likes 1
Leave a comment:
Leave a comment: