Tell me more.
Is there an easy way to rewind the transducer coils when the wire breaks right at the coil?...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
446 results in 0.1591 seconds.
Keywords
Members
Tags
-
No connectors. Wires go from the transducer coils to the jacks. I didn't take any pics of the rest of the internals & I didn't spend a lot of time studying...
Leave a comment:
-
A Little Engineering That I Appreciated
I recently needed to replace a reverb pan for a friend's amp, so I bought one of the MOD brand pans.
I really like how they configure their...
-
The Accutronics values are impedence values, not DC resistance. If you measure the inductance of the transducers with an inductance meter (set to 1kHz), you...
Leave a comment:
-
The guy who made that drawing left off a critical wire in each of those particular drawings (derived from the same original). Oops. Sorry about that. I...
Leave a comment:
-
I'm talking about the cable from the guitar to the amp. I use one of these now:
Elixir Premium Instrument Cable Straight - Straight 10 FT |...
Leave a comment:
-
The cap to the wiper of the tone pot doesn't make it 50's wiring. The cap can be from the wiper to ground or terminal 1 to ground and it won't make any real...
Leave a comment:
-
Oops. Now that I look at it, the way I told you to wire that "first" version will work backwards - clockwise will roll off the highs. I've fixed...
Leave a comment:
-
-
Oh, and don't be surprised if the guitar sounds a little brighter once you've converted the Master Volume to Master Tone, since you'll be taking the load...
Leave a comment:
-
Yes, the existing tone switch is parallel to the now Master Volume/soon to be Master Tone pot. You can change the existing caps on the tone switch to try...Last edited by Phostenix; 12-22-2011, 03:44 PM.
Leave a comment:
-
Leave a comment:
-
Is that schematic available online? I don't see it on the TV Jones site....
Leave a comment:
-
You won't hear any difference between the 2 ways I gave you to wire it. They are just 2 ways to achieve the same thing. But, if you (or someone else reading...
Leave a comment:
-
On the Fender no load pot, when you turn the knob fully clockwise, the wiper is disconnected from the circuit so the tone cap and the resistance of the pot...
Leave a comment:
-
-
Another way to rewire is to leave the output jack connected to the wiper and move the wire from the 3-way pickup selector switch from terminal 3 over to the...
Leave a comment:
-
Just copy the url from the address bar of your browser and paste it into your post here. The forum will take care of the rest.
I found...
Leave a comment:
-
Looking through Darren Riley's inventory today and came across another 4PDT On-On-On toggle for less money than the DiMarzio.
EP_4362-010 On-On-On...
Leave a comment:
-
-
I'm sure what you want can be done, but I'm not that familiar with Gretsch guitars so I'll need more info.
Are the pickups 2 wire? Braided...
Leave a comment:
Leave a comment: