Announcement
Collapse
No announcement yet.
Search Result
Collapse
14 results in 0.0040 seconds.
Keywords
Members
Tags
-
Nope just a few millivolts like you said. I have +/- 15v on my rails now and my sliders are working. No more signal noise, think I was on a bad input. ...
-
Ok I jumped a +20 rail to IC45, IC51 pin 8 on both and I have the right main working! I am getting alot of static and clipping on the line though, but its...Last edited by efsnick; 07-23-2009, 04:51 AM.
Leave a comment:
-
I guess I misread my meter, cause its saying -20 now. But yes the ones missing power(Negative on both rails) are common to one area. They are on the main...
Leave a comment:
-
Mike,
Yeah I tried the sub outs, I could only get a couple of them to work. I know behringer is far from the best, but you got to work with...
Leave a comment:
-
Ok, I swapped IC45, IC51. I am still getting the same voltages, but something I didnt notice before is that both IC's, on pins 4 and 8 are operating on -200v...
Leave a comment:
-
Thats why I was saying the 2nd op amp in IC51 is Showing a large 20 volt output. Would that mean just one side, left or right would be out, not both?
Leave a comment:
-
Ok, so on IC51 I am showing a -15mv on the output of Op-A on Side b however -20v on Op-b's output, which is the same voltage as the non-inverting input on...Last edited by efsnick; 07-22-2009, 03:21 AM.
Leave a comment:
-
Ok, I have measured all of the outputs on the IC's you mentioned and I am getting no voltage. Am I doing it right? I hook the negative line of the meter...
Leave a comment:
-
I am familiar with the deck and have everything assigned as it should be.
I have not had a chance to measure the IC's you mentioned yet,...
Leave a comment:
-
50 years huh? Maybe I will get one of my instructors to do it for me. Are there rules against passing along a schematic even if the item is discontinued...
Leave a comment:
-
Crap, your right they are surface mount, I was just assuming other wise based on how easy it was to pop the slider in and out. I think I can handle it, ...Last edited by efsnick; 07-15-2009, 03:43 AM.
Leave a comment:
-
As in am I capable?? ha ha I hope so?! We played around with op amps a little in my Linear IC class, but that just means I know enough to be dangerous....
Leave a comment:
-
I actually only pulled out the main slider and tested it in another circuit of mine as a dimmer and tested the resistance on it. Seemed to be ok.
...
Leave a comment:
-
Eurodesk SL2442FX-Pro Mixer - No Output
Hello,
I have a Eurodesk SL2442FX-Pro Mixer that a friend gave me and im trying to fix so my band can use it. The board has no output on...
Leave a comment: