Announcement
Collapse
No announcement yet.
Search Result
Collapse
481 results in 0.1600 seconds.
Keywords
Members
Tags
-
I'm having deja-vu all over again. Wasn't this subject discussed in depth here more than a year ago?
-
Would a tile saw work?
http://https://www.harborfreight.com/7-in-portable-wet-cut-tile-saw-69231.html
Leave a comment:
-
I just recently (last week) re-stuffed a can cap. All the internal connections were aluminum. I used a dremel to cut the can close to the base, unwound all...
Leave a comment:
-
It looks like you could cut most of those fins off, and still have the same cooling.
Leave a comment:
-
-
-
Enzo, your mention of a center speaker reminded me of the Fischer 500c that I owned as a teenager. I just looked up it's schematic, and it has the 4 ohm tap...
Leave a comment:
-
Thanks guys. That's what I was thinking. It sounded pretty good to me the last time I used it, about 10 years ago. I'm re-capping it now. and found lots of...
Leave a comment:
-
Eico ST70 OT feature or flaw?
As you can see on the schem. below, the Eico ST70 has it's OT wired so that the 4ohm tap is grounded, not the com. tap. There are lots of online posts, web...
-
Ive had a couple of headsets develop intermittent breaks at the in line cable control. I don't use those so I just cut them out and re-splice.
...
Leave a comment:
-
Chuck's right. The most likely fault is the wiring, not the pcb or any of it's components....
Leave a comment:
-
-
I admire your persistence. I think I would have told the owner that it couldn't be done, and I'd have to cut them off.
Leave a comment:
-
-
LOL really?
He probably meant 3 deg....Last edited by dmartn149; 11-12-2019, 03:07 AM.
Leave a comment:
-
You could probably use the stuff that they use to restore plastic automotive headlight lenses
Leave a comment:
-
Wow, that's pretty. Don't some Rick basses have an indentation for the bridge to sit in? Also you can use a feeler gauge with the edge roughed up on a grinder...
Leave a comment:
-
-
I drain caps through an old analog multi meter. I can set it on VDC and watch as the meter drops to 0...
Leave a comment:
-
Thanks Chuck. Yes jumpering that R gives plenty of trem. I'll try different R values there till I'm happy with the max. I'm not worried about the pot tap...
Leave a comment:
-
Ok, I couldn't keep Chuck in suspense any longer. New rectifier has it back the way it was before I went EXTRA stupid....
Leave a comment:
Leave a comment: