I have no .033 at home. I tried a .047 and get a slightly lower output but there is no annoying "sewing machine distorsion" anymore.
I have...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
64 results in 0.0064 seconds.
Keywords
Members
Tags
-
OK.
As you explain it i understand i do best if i use a DI box and cut the cap. Or if i put in smaller resistors and not use a cap. Because the treble...
Leave a comment:
-
I tried another way to upload the picture.
I gonna try 2 different solutions.
Before i change cap to a bigger I try a DI box and use...
Leave a comment:
-
I recorded it in to a zoom H4 recorder .
I Will post som pictures screen dumps from my sound editing program.
Leave a comment:
-
I tried some different low pass calculators and i got 720 hz. The 47K resistor is the resistor before the cap to ground.
C=4.7nF R=47kΩ =720.48Hz...
Leave a comment:
-
Line out
Maybe i should publish this in another forum. The last post here is from 2016!!
What's the best way to do a line out?
I've...
-
-
-
Great job.
It's just one channel!.
Is the first tube parallell connected?
Leave a comment:
-
The wire wound resistors is normally bigger. Check you have room for them before you buy them.
Leave a comment:
-
½ watt be just fine for most of the resistors. The 10K in the power supply must be bigger. i use a 5 Watt 10K and a 2W 22K
Leave a comment:
-
Since 7 years back my last post here have been wrong. It should be C3! If you cut c1 it be quiet.
Leave a comment:
-
It don't give many different comparible tubes, because there ain't many.
It is a single triode preamp tube with 60% amplification factor......
Leave a comment:
-
You can't tell if it's à good Harp amp just by looking on the tubetype. This configuration give some hope, but,,, it is a lot of other things in a amp decide...
Leave a comment:
-
I will give it some more time and see what happends. I will not fool around with the Thinner-Acetone experiment. I have no good transformer for this either....Last edited by arnenym; 10-03-2011, 08:00 AM.
Leave a comment:
-
My favourite 12 speaker, so far, is Weber 12F150B. It have a massive bottom and sparkling high's.
Jensen P12R -RI is a good one to and a C12Q is not...
Leave a comment:
-
The amp sounds great wit my 2x10 cab. But a got a beautiful old Ampro cab with no speaker.
if it dont be good in this amp, maybe it works good in ...
Leave a comment:
-
I know you do so and i read about you have a method for faster speaker break in. And i am glad you answer this.
It is the 10-15 hours playing who annoy...
Leave a comment:
-
Faster speaker break in
I buy a Eminence cannabis Rex. It is a very dull and stiff in the sound. Do anyone have a tip who could bring down the break in time?
-
My favorite shoes were the most comfortable just before they broke..... ...
Leave a comment:
Leave a comment: