here is what i have
1. three humbuckers
2. one super switch
3. one dpdt (on,on,on) the special one for series/parallel/split switch...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
55 results in 0.0068 seconds.
Keywords
Members
Tags
-
i should mention this happened after amp was in club and power spiked in the club and the breaker for the club blew, turned breaker back on and this was the...
-
I Need QSC RMX 2450 help
Im thanking everyone for there help in advance, you guys really no your stuff.
I have a QSC rmx 2450. Problem: turns on, green led on, fan...
-
you guys are to good
ordered it, installed it, amp powered up with no problems
thanks as always
Leave a comment:
-
cant figure out what diode this is
can someone please help me with a part number for this diode or better yet where to get one, i typed the numbers on it on mousers website and nothing came...
-
can someone tell me part # for this
can someone tell me part # for this
1316 got me nowhere
It came out of mackie mixer 1604-vlz
...
-
-
need mackie 1604 cr vlz schematic
need mackie 1604 cr vlz schematic, please
movekmusic@yahoo.com
-
So your saying bridge pickup works fine, volume and tone. neck pickup, volume works, when you turn tone down, you lose low end instead of high end?
...
Leave a comment:
-
So then im wondering what would be normal current draw on this amp (rough estimate) and with my dmm, is it alright to read current from 0-20a, if so then...
Leave a comment:
-
thanks enzo, the ribbons were the first thing i checked, these things are known for the ribbon cables going bad, or if your rushing, and its something ive...
Leave a comment:
-
mackie 1604 vlz bad channel
can someone please point me in the right direction, ive had a few of these mixers and there has always been at least one channel thats out (no signal through...
-
Would this ammeter work for what im trying to do, and should i also get a dc one.
10A AC PANEL METER | AllElectronics.com
Leave a comment:
-
-
sounds like you need a fret dress for sure, at least from the 12th fret and higher, and dont forget about your saddle radius compared to your neck radius
Leave a comment:
-
ok, it was the fuse in my dmm that was faulty, but after doing some more research i dont know if my dmm is right for this job.
You can only have it...
Leave a comment:
-
thank you for your replies.
Ok I understand about the variac's purpose, but where do i hook up my ddm to check current draw, I set it to 20a but where...
Leave a comment:
-
powering up marshall avt150 with variac
ok i just replaced output power transistors on my marshall avt150, and i am going to go by enzo's recommendations, by powering it up with a variac and watch...
-
yes the diodes checked out good and the bridge.
So what are you saying is the major difference between variac with ammeter and a light bulb current...
Leave a comment:
-
First off thank you for the help.
So what your saying is power would have to be on, to see if the diodes or bridge rectifier, are working correctl...
Leave a comment:
-
How do i check this bridge rectifier
Hi, how do i check this bridge rectifier.
Also , in the second picture, are those diodes or bridge rectifiers, if they are diodes, on my dmm shouldnt...
Leave a comment: