Don't know, but I can say from experience that this sometimes works:
http://www.frets.com/FretsPages/Luth...nosis/TrussRod...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.2007 seconds.
Keywords
Members
Tags
-
Yes, we're talking about HAND sanitizer.
https://www.cdc.gov/niosh/ershdb/eme..._29750029.html
"inhalation of high...
Leave a comment:
-
Here's how we do Bloody Mary in Maryland.
...Last edited by rjb; 01-15-2020, 03:56 PM.
Leave a comment:
-
-
-
Just to mention some specific products:
Loctite Plastics Bonder (2-part acrylic) is recommended for ABS and polycarbonate, but not for polypropylene...
Leave a comment:
-
I thought I was the last person on the planet to get a smart phone. They are good for travel - I use it more as a GPS than as a phone.
-rb
Leave a comment:
-
No experience here, but I do know that sound level meter apps are available for as little as free.
Assuming you use a smart phone, that would be one...
Leave a comment:
-
IIRC, that really was the prevailing consensus at the time. With the exception of CRTs, vacuum tube production had ceased in the U.S.
IIRC, that i...Last edited by rjb; 02-04-2019, 03:44 PM.
Leave a comment:
-
Joe Gwinn says annealing small carbon steel parts is easy.
https://music-electronics-forum.com/...viewfull=1#pos...Last edited by rjb; 01-21-2019, 03:20 PM.
Leave a comment:
-
BTW, my suggestion of tuning the guitar body with a router was meant to be a joke. (Although admittedly not a very funny joke.)
...
Leave a comment:
-
That's good. Because my next suggestion was going to be to "tune" the guitar's body with a router.
-rb...
Leave a comment:
-
From the Peanut Gallery
Alternate interpretation... "I want this pickup to sound more like a single coil and less like a humbucker."(?)...Last edited by rjb; 01-07-2019, 02:57 PM.
Leave a comment:
-
-
OK, 5% worst case. But even with a 240K volume pot, the error is only 3%. As you say, close enough.
Beating a dead horse:
The error will...Last edited by rjb; 01-01-2019, 05:14 PM.
Leave a comment:
-
Short answer: A little over 7k. (Assuming the pot is turned to 10.)
Long answer: Rpup = Rjack / (1 - Rjack/Rvol)
I guess your scenario...
Leave a comment:
-
Just to elaborate, the resistance measured at the jack is:
Rjack = (Rpup x Rvol) / (Rpup + Rvol)
Solving for Rpup (assuming I remember...
Leave a comment:
-
This seems to have flown in under the radar, but some of the latest Chromebooks now have native support for Linux. You no longer have to mess with Crouton...
Leave a comment:
-
Correction: Standard wiring for P pickups coils is in series; the suggestion was to try them in parallel. This makes quite a difference because the inductance...Last edited by rjb; 12-20-2018, 10:43 PM.
Leave a comment:
-
What timing! This just arrived in my inbox.
https://www.premierguitar.com/articl...-tone-bender-f...
Leave a comment:
Leave a comment: