Announcement
Collapse
No announcement yet.
Search Result
Collapse
413 results in 0.0229 seconds.
Keywords
Members
Tags
-
BGW had it figured out in the 70s: The component side and the solder side are one and the same. Piece of cake to service (so long as you don't have counterfeit...
Leave a comment:
-
According to the schematics I have, they are 2SC3264 in later ones, 2SD424 or 2SC3482 in older ones....
Leave a comment:
-
From my experience at home, it would seem that long term exposure to an ozone generator can promote rust and cause some rubber-like compounds to break do...
Leave a comment:
-
Perhaps I missed something in the conversation (short attention span): Shouldn't there be a filter cap from the junction of R7 and R9 to ground? As it sets,...
Leave a comment:
-
While you are in there, check that the EL84s' grid stoppers are on the tube sockets, not on the PCB. JJs can have stability (oscillation) issues when the...
Leave a comment:
-
We (day job) have a lot of SVTs. In 14 years I think I've had to replace two pots. If they are breaking, I believe it is human error. If you give him metal...
Leave a comment:
-
Run the output of the bad channel into the input of the good channel with a polarity reversing cable. Monitor the output of the good channel. Set all external...
Leave a comment:
Leave a comment: