Hi All,
After a two-year delay, I finally got back to trying to fix this keyboard. After reading about contact cleaners and getting worried...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
218 results in 0.0202 seconds.
Keywords
Members
Tags
-
Hi All,
Thanks for all the tips. I tried the eraser approach again, but my contacts on the PCB side were already glowing with a pretty nice...
Leave a comment:
-
Hi All,
I tried the pencil eraser approach (#2 of course). I rubbed the contacts and then wiped it clean with some alcohol. I let it dry,...
Leave a comment:
-
Caig CaiKote44 for keyboard contacts
Hi Guys,
I was wondering if anyone has ever used the CaiKote 44 product from good old Caig (of DeOxit fame) for contacts on vintage keyboards......
-
Depending upon how old your Mark III is, the springs within the tank might be gummed up with bits of foam.
I bought a IIC last year (originally...
Leave a comment:
-
Hi,
You may not get too many replies here...high gain amps tend not to be the focus of the folks on this board.
For a $1500...
Leave a comment:
-
If you're willing to put in a pull-pot for your volume (or tone) knob, you can use it to put a cap in series with your pickup. With the knob pushed it, you'd...
Leave a comment:
-
It's expensive, but I really liked this book...
Tube Amp Books - - TUT - The Ultimate Tone
It doesn't have high production values,...
Leave a comment:
-
Power Conditioner? Furman?
Hi All,
I'm getting really sick of intermittent hum/buzzing in my guitar amps. It comes and goes depending upon the day and depending upon the...
-
Sustaining mid range makes me think of Mesa Boogie Mark Series, not Marshall. Is the Boogie sound what you're talking about?
Chip
Leave a comment:
-
I'm curious to get a little more info...
What is your B+ and your plate resistor for V1A on your test amp?
Are you running clean, dirty,...
Leave a comment:
-
It is very common for Mark II and Mark III owners to convert their (freakishly heavy) combos into a head + open backed cab. I've not seen many Mark IV owners...
Leave a comment:
-
Hi,
There's not much talk of Mesa Boogie products on this particular board. Furthermore, people who use (or repair or modify) Mesa pre-amps...
Leave a comment:
-
Be aware that if you build your pedal using either a 1st order (ie passive) highpass, you will not get the same response as a graphic eq with all the low...Last edited by chipaudette; 01-09-2010, 10:09 PM.
Leave a comment:
-
8.5 on volume will never be clean
Oh, and re-reading your post, you say that you run the volume on 8.5? You'll never have a clean sound at...Last edited by chipaudette; 11-05-2009, 11:24 AM.
Leave a comment:
-
I've tried the EVM12L
Hi,
I've got a DRRI with the Jensen C12K as the stock speaker. I've also tried it with the EVM12L. I didn't...Last edited by chipaudette; 11-05-2009, 11:24 AM.
Leave a comment:
-
I'm not quite sure how he does the muting, but here's the most likely option that I see...
Throughout the amp, there are a number of J-FETs that...Last edited by chipaudette; 10-03-2009, 09:52 PM.
Leave a comment:
-
What voltage are you going to use for B+?
If you run on the low side (~240-260V) you may get a very different sound than if you run on the...
Leave a comment:
-
Mesa Mark V Schem Available!
Hi All,
For any students of the Mesa Boogie Mark Series, I've finally seen a link for the Mark V schematic...the link is available through...
-
65 Deluxe Reverb shares...
FWIW, the Fender blackface amps (Deluxe Reverb, Twin Reverb, Super Reverb) all implement their vibrato/reverb channels...
Leave a comment:
-
Yes indeed, good explanation.
To continue Chuck's line of discussion...here are some examples:
Tone Stack Early: Blackface/Silverface...Last edited by chipaudette; 07-02-2009, 11:57 AM.
Leave a comment:
Leave a comment: