Announcement
Collapse
No announcement yet.
Search Result
Collapse
448 results in 0.0231 seconds.
Keywords
Members
Tags
-
Line-In to Active EQ of Fender Super Twin?
I would like to remove the connection between pin 1 of V1B and the .022 cap and apply a line level signal to the freed lead of the cap. (I also plan to remove...
-
"Separation in space isn;t the point as much as having the two sound sources. The two sources combine in your ear."
"...there...
-
Add Line In: Fender Super Twin Reverb?
I want to add a line-in jack to the Fender Super Twin Reverb.
I was thinking I could disconnect the wiper on the 100K Output Level pot from the...
-
Qhorus Effect: Roland Jazz Chorus Amp?
Why the chorus effect on the Roland Jazz Chorus amp considered to be so special?
Is it mostly because it was a stereo effect built into a stereo...
-
Stereo Separation: Roland Jazz Chorus JC-120?
It seems this amp is popular for more than one reason, but the fact that it is stereo is a big reason.
Since the speakers are so close to each...
-
Part Numbers?
Does anybody have part numbers for the potentiomers and any other parts needed for this mod?
How about some Mouser...
Leave a comment:
-
I have a guitar that has 3 controls, neck volume, bridge volume, and tone, and I would like to apply this mod to my guitar.
Since this mod...
Leave a comment:
-
It probably will not cause any damage to the pickup, but the output of the used coil will probably be lower and the tone will probably change.
...
Leave a comment:
-
I'm thinking the answer might be pretty simple. Looking at the response curves closely, both drivers have variance in SPL at about 1khz. The Sigma has about...
Leave a comment:
-
Eminence Omega Pro vs Sigma Pro?
Is there any reason why the frequency response of the Omega Pro-18 is specified to be only 40Hz-800Hz instead of 41Hz-2.4kHz like the SIGMA PRO-18? The response...
-
Tiniest bandsaw I've ever seen. Looks like a versitle machine.
Leave a comment:
-
The eBay seller looks good. I might attempt doing a nut on a low end guitar.
Leave a comment:
-
-
Adjustable Brass Nut?
I am interested in learning more about Adjustable Brass Nuts such as this one available at allparts.com:
BN-0888-008 Adjustable Brass Nut for GibsonŽ...
-
Ibanez ART100?
I was thinking about buying an Ibanez ART100. I am interested in the guitar because it is a Les Paul style, but it has a thinner lighter body than a Les Paul...
-
Fender Studio Bass OT?
The OT is burned up in the Studio Bass.
Mercury Magnetics has a replacement transformer (Mercury Magnetics -- The Guitar Amp Transformer C...
-
Will probably mount OT on head cabinet. Will probably need to run ground wire to ground OT. Will pay attention to orientation of OT to PT to avoid hum. Might...
Leave a comment:
-
I have a couple of twins I want to convert. They sound good with the various bass cabs I have.
My big complaint is that the 4 ohm output impedances...
Leave a comment:
-
Silverface Twin to Bass Amp Head?
OVERVIEW
I plan to convert a silver face twin reverb combo into a bass amp head.
(For schematic, see http://www.webphix.com/schematic%20h.....
-
It seems the bridged PA 100 amps could survive through the imbalance when one end of the phone cable that jumpers the inputs of the two amps together pulled...
Leave a comment:
-
Attached is a diagram on how to bridge two Marantz monoblack amps together. The Marantz manual is included too.
I think these might be transistor...Last edited by tbryanh; 07-23-2011, 01:04 AM.
Leave a comment:
Leave a comment: