Announcement
Collapse
No announcement yet.
Search Result
Collapse
104 results in 0.0118 seconds.
Keywords
Members
Tags
-
That's quite a book. I can see it's going to take a while to wade though like Pressman's SMPS book. At least all the answers I'm looking for ought to be...
-
Lin Topology Primer
Is there a primer on the Lin Topology that explains different input and voltage amplification stages and various schemes of compensation for these amps?
-
Sweet winder.
I have someone who will sell me an old one that can stick wind up to ten windings at a once for $150. Although it's halfway across...Last edited by FredB; 03-09-2013, 02:28 AM.
Leave a comment:
-
OK, I understand that. I've noticed that as the supply voltage goes down to a SMPS, it will draw more current to maintain the output, hence the negative...Last edited by FredB; 03-04-2013, 01:24 AM.
Leave a comment:
-
What do you mean by that?
What kind of load would play well with compensation?...
Leave a comment:
-
Yes, it does. I have noticed some circuits absolutely have to be tuned by ear or other actual performance behavior.
I've sorted...Last edited by FredB; 03-03-2013, 01:21 AM.
Leave a comment:
-
Yes, it does. I have noticed some circuits absolutely, positively have to be tuned by ear.
I've sorted out the Nixie power supply's...
Leave a comment:
-
I've gotten the simulation speech before, although at the moment I am financially paralyzed by poverty. So, with only plenty of time, there's little else...Last edited by FredB; 02-28-2013, 07:46 PM.
Leave a comment:
-
If the amp is being designed you could increase the plate voltage and then use a large value screen grid resistor to create a larger than usual drop due to...Last edited by FredB; 02-28-2013, 08:26 AM.
Leave a comment:
-
I recall that some one has already done that. They sell them for about $75. If I can find it, I post a link.
Here's something else I just...Last edited by FredB; 02-28-2013, 09:00 AM.
Leave a comment:
-
I see, that would be good for toroidal output transformers.
You are insightful, that's exactly how I worked out the sag generator with a sort...
Leave a comment:
-
Well, I suppose I meant a B+ servo, to implement an AB sag dynamic into a SE amp. It senses the current in the output tube via a 1 ohm cathode resistor,...Last edited by FredB; 02-27-2013, 10:51 PM.
Leave a comment:
-
With plastic caps, I've only noticed differences between different dialectic types, rather then between different brands, as in the difference between polypropylene...
Leave a comment:
Leave a comment: