Hi mozz
The only specs I have for the existing device are those on the schematic, where it's shown as a PTC100.
Unless I'm remembering this wrong,...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
38 results in 0.0057 seconds.
Keywords
Members
Tags
-
-
Fender Frontman 65R
Hi.
I'm just wanting a bit of advice.
I've had a Fender Frontman 65R brought in for repair. The thermistor RT1 PTC100 is reading high and...
-
Thanks for that Enzo.
Yes that's the email address I used. I've never had a problem with Peavey before and was registered with Peavey UK for years...
Leave a comment:
-
Peavey Escort 3000 schematic
Hi
Does any body have a schematic for a Peavey Escort 3000 please.
I've emailed Peavey twice over the past two weeks and can't get a reply....
-
Carlsboro pmx 12-2 schematic request
Hi
Does anybody have a schematic for a Carlsboro pmx 12-2 powered mixer please?
I have contacted Carlsboro, but they don't have schematics for...
-
It could easily have been that 52 Bill. I'd serviced / cleaned all the connectors internal and external whilst I was waiting for the first replies to this...
Leave a comment:
-
I'm sure you'll be able to sell most of the stuff you're not wanting.
Are there any rules on this forum to stop you posting a list of the things you're...
Leave a comment:
-
Thanks for all the help. It's helped my confidence levels. g-one thanks for confirming my thoughts. The amp has a pair of class D amps running in bridge mode....
Leave a comment:
-
Thanks for the replies. I have done a lot of reading on smps and as much information on class D amps as I've been able to find. I understand the principles...
Leave a comment:
-
First atempt at class D amp repair
Hi
I'm about to start on my first repair job on a class D amplifier, (Orange Terror Bass 500) and I wanted to check with more experienced people, if...
-
Hi Ted.
You beat me to that bit of info.
I'd rung EMS yesterday after Enzos tip off about Peavey taking over Trace had sent...
Leave a comment:
-
Thanks Enzo
All good points.
I suppose eventually the question of how it sounds will be up to the customer, but I do take your...
Leave a comment:
-
Hi Enzo.
Thanks for your reply.
I'd already removed the unit before posting to prove that the fault was coming from that module, having...
Leave a comment:
-
Trace Acoustic DC2 module
Hi
I've had a Trace Acoustic TA100R brought to me for repair (schematic attached). The DC2 module has gone faulty giving random bursts of noise. The...
-
The band that brought it to me said that it had been cutting in and out on one channel for a couple of gigs until eventually it had killed the speaker it...
Leave a comment:
-
I'm sorry to say that despite repeated attempts I still can't get any response.
So, if anybody can help I'm still needing a schematic for this amp...
Leave a comment:
-
-
C-Mark MR2650 schematic request
Hi,
Does anybody have a schematic for a C-Mark MR2650. I've tried contacting the manufacturer (no response) and all the usual searches with no luck....
-
Thanks for all the help. There's a lot of good info there.
I've been gathering info as I've been working on this.
The early Hurricane had a...
Leave a comment:
-
Hi Enzo
Thanks for the reply. The power tubes are a pair of EL84s. The resistor is in parrallel with a 100uF capacitor. I'll try your idea of checking...
Leave a comment:
-
Cornford Hurricane cathode resistor
Hi
I've got a Cornford Hurricane in for repair with burnt out cathode resistor and power transformer. I know that Cornford schematics are rarer than...
Leave a comment: