Hi,
My friend's Digitech GNX3 is giving a serious problem..
The patches start changing automatically once the processor is started!!
...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
16 results in 0.0058 seconds.
Keywords
Members
Tags
-
Digitech GNX3 Problem
-
But still, any suggestions?? What could be the problem?...
-
Marshall MG10CD won't stay fixed!!
Hi,
I have my friend's MG10CD for repair. It used to start clipping in the clean channel after 11 o' clock.... I replaced the TDA2030 IC...
-
Sorry for the late reply!
I have built the circuit that Jazz P Bass has provided the schematic of....SUCCESSFULLY
@Enzo - Thanks...
Leave a comment:
-
Lm3875 or stk4141 ?!?!?
Hi,
I am a DIY Hobbyist from India and was thinking of building a Gain Clone amp with the IC LM3875. Unfortunately the IC is not available in my locality....
-
-
Laney LX65R Overdrive channel not working
Hi,
I have a Laney LX65R and the overdrive channel of it is not working. I am getting a little bit of crunch with very less gain after switching on...
-
Well supply proper ventilation to the IC and if possible change it.
Befor that try chaging the capacitors on the small module. If capacitors r busted,...
Leave a comment:
-
Yes the headphone test will work , coz after seeing the schematic, the output section of the line out is totally separate from the main output section
Leave a comment:
-
if dis wud hav been da problem, y only after sum time there is a volume drop?
it should hav happened immediately
n the volume resumes after...
Leave a comment:
-
as i said..if there is a volume drop problem....the problem is mostly only in the pre amp section.......the TDA7293V is damaged...dats da reason its happenin....n...
Leave a comment:
-
Also sometimes, if the IC burns or is damaged, it damages the little circuit on which it is mounted. So if you want you can buy the replacement circuit from...
Leave a comment:
-
Try to troubleshoot the output IC TDA7293V , it is the heart of the power output section, check for dry solders....if not working, change the IC. It is a...
Leave a comment:
-
If such an issue persists, it is possible that there is no problem in the preamp section, the problem is in the power output stage, what are the transistors...
Leave a comment:
Leave a comment: