Yes, a larger area* should make an air coil noisier and more efficient to counteract the noise of pickups once wired properly.
Reason why (and...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
208 results in 0.0182 seconds.
Keywords
Members
Tags
-
Last edited by freefrog; 04-18-2024, 09:10 AM.
-
+1 from the start about higher inductance as an annoying side effect when one tries to make a small dummy coil noisier (and therefore more able to counteract...
Leave a comment:
-
If I can share a slice of my own experience: I've got mixed results personally with the Ilitch recipe applied to P90's. More turns were necessary than for...Last edited by freefrog; 04-15-2024, 04:10 AM.
- Likes 1
Leave a comment:
-
The idea that magnets were not weaker in the past has been abundantly illustrated by James Finnerty (Rewind pickups) on the MLP forum, with pics of his measurements....Last edited by freefrog; 02-01-2024, 12:44 PM.
- Likes 2
Leave a comment:
-
My archives mention 460 Ohm of 36 AWG for an Ilitch Strat backplate.
For low resistance/ low inductance single coils, I've personally got satisfying...
- Likes 2
Leave a comment:
-
Isn't because 120Hz is an harmonic of the 60Hz hum due to the mains?
FWIW: maybe nothing but that's what came to my mind......
Leave a comment:
-
A testimonial about stray capacitance of braided shielded wire there, from Manfred Zollner (enable autotranslation of the subtittles if needed):
...Last edited by freefrog; 04-17-2023, 06:01 AM.
Leave a comment:
-
Update:
The switchable 1nF cap on the green channel has been reduced to 680pF for a less abrupt effect. I like it like that.
Have...
Leave a comment:
-
I mentally schematize what is evoked as a question of inductance, mainly.
"High power overwound" = high inductance.
"Low...
- Likes 1
Leave a comment:
-
So, what is the difference between the last two P90 sized humbuckers, both with 4 conductors cables?
Splitting them and checking the resonance...Last edited by freefrog; 08-14-2022, 06:41 AM.
Leave a comment:
-
A few more "slices" of experiments. Same trimming than before for the same contextual reasons but I still hope that it will allow to “get...Last edited by freefrog; 08-07-2022, 07:12 AM.
Leave a comment:
-
Let's recall that I've shared selective examples of humbuckers with a lower "crossover frequency" in the post 2 and relatively detailed explanations...Last edited by freefrog; 08-02-2022, 09:18 AM.
Leave a comment:
-
Sorry about the link, it's actually not this topic that I had in my mind. I'll have to redo my research of March 2022 on the Boogie Board and elsewhere....Last edited by freefrog; 08-01-2022, 05:38 AM.
- Likes 1
Leave a comment:
-
Response of the TA15 as captured from the 8 Ohm output, through a direct box between amp and cab. First pic = action of my mid shift mod, all control at noon...Last edited by freefrog; 07-31-2022, 07:50 AM.
Leave a comment:
-
A couple of mods on a Mesa TA-15...
The amp was biased too hot in "dyna-watt" (IOW fixed bias) mode and its channels switched randomly, so it had to receive the upgrades evoked here:...Last edited by freefrog; 07-31-2022, 05:41 PM.
-
Another contribution of the Sunday morning while the house is sleeping. Same editorial limitations than in my previous posts but I hope my selective trimmed...Last edited by freefrog; 07-31-2022, 06:52 AM.
Leave a comment:
-
AFAIK: a slightly lower overall inductance + a wee bit higher Q factor + a tad modified mag field, coupling & balance between coils... as well as altered...Last edited by freefrog; 07-29-2022, 08:04 AM.
- Likes 1
Leave a comment:
Leave a comment: