Announcement
Collapse
No announcement yet.
Search Result
Collapse
9 results in 0.0046 seconds.
Keywords
Members
Tags
-
I Think I found the problem. forget about my last 2 posts. The red wire connects to a clear diode-like thing. on the in side of the diode I get full electricity,...
-
if i hold one end of the vfoltage tester on one end of the red wire and the other on the other end I get a full voltage reading. when I hold the tester on...
Leave a comment:
-
actually the red wire doesnt go straight to the curcuit bord but to what looks like a diode attached inside where the AC jack is. the black wire goes to the...
Leave a comment:
-
damn straight its appropriate for my reality.
So, I did the above tests and the pins that should be getting half the voltage and the pin that...
Leave a comment:
-
Thanks a lot for really spelling it out for me. thats what I needed. I'll test it, see what I get...
Leave a comment:
-
thanks. that diagram helps me a lot. still not sure which setting to put my multimeter on when testing this circuit
Leave a comment:
-
I bought a multimeter but am unsure as to which setting I shoud put it on to check the curcuit. They are: ACV which has either 750 or 200. 1.5V(4.0mA)9V(25mA)....
Leave a comment:
-
how would I go about checking the voltages when I turn it on? one of those voltage meter things? I can solder decent but not am not very confident soldering...
Leave a comment:
-
Mxr distortion+ help!
I recently bought a older mxr distortion+ pedal at a pawnshop for $30. Dont know how old it is but its not one of those -plastic cased ones. It has a red...
Leave a comment: