Announcement
Collapse
No announcement yet.
Search Result
Collapse
29 results in 0.0053 seconds.
Keywords
Members
Tags
-
From what I've gathered so far, without a proper schem, is it's merely a common-mode ac choke to suppress high frequency noise on the mains. After this choke...
-
-
-
Thanks for the reply! It seems the 05120 corresponds to 0.5A 12uH. I can't find this specific combo anywhere, BUT I did find 0.8A 13.4uH. Same lead spacing...
Leave a comment:
-
Mains AC choke necessary?
Working on a Moog Taurus 3. Wouldn't power on. There's a small choke first thing after the power switch and fuse, one "side" of the choke was reading...
-
km6x: This is great. I've since dropped the amp off with a local buddy/tech who works on big SS amps often, but he would also appreciate any suggestions....Last edited by Enoch0))); 07-19-2016, 08:53 PM.
Leave a comment:
-
This is great! thanks Olddawg! Sounds very reasonable, I will give that a shot. Cheers!
Oh, here's the schematic: http://www.peaveycommercia...
Leave a comment:
-
Crest Pro 8001 Power Amp - Bad Crossover Distortion On One Channel - Ideas?
I recently picked up a Crest 8001 for a mere $250 for my bands practice PA (yes, overkill). One channel has some gnarly crossover distortion. At first I thought...
-
Staticy Woosh when turning off standby, background grit: Rivera Fandango 55
I'm re-tubing a Rivera Fandango 55 for a friend. He complained of it not "sounding right" and not clean when it should be clean. I immediately thought...
-
Big Muff Pi: Adding Parallel Coupling caps - can I run them through a switch?
I have a Black Russian Big Muff Pi
I've added some larger caps parallel to each coupling cap to give the pedal some more low end (yeah, the...
Leave a comment: