Announcement
Collapse
No announcement yet.
Search Result
Collapse
11 results in 0.0047 seconds.
Keywords
Members
Tags
-
Keep in mind that a piezo transducer IS a capacitor, but it actually has quite small capacitance itself. Any piezo element which is suitable over the full...
-
I think that PAIA MS unit would be worth experimenting with, although I have had good luck with simple direct stereo for live concert taping. I get the idea...
Leave a comment:
-
Another thing I have done since I have been using only the most basic of desoldering tools is to push a length of fresh stripped copper wire into the hole,...
Leave a comment:
-
Condenser Mic preamp for PC
I was going to try posting this in the Amplog as kind of a build project but have been unable to create a blog. I already had to register separately from...
-
There might have been a heatsink on the outside of the chassis, is there any sign of heatsink grease on the chassis itself?
Mike
Leave a comment:
-
I like the metal solder suckers with the teflon tip myself, and I also sometimes place the point of the iron on the joint to be unsoldered, then immediately...
Leave a comment:
-
I thought these things were tunable-core chokes, each one custom wound for a particular frequency, each paired with a corresponding custom-value precision...
Leave a comment:
-
there's good replies already here which if I had seen I probably wouldn't have written as much, but here's my 2cents,
Well, I'm going to assume...
Leave a comment:
-
when disconnecting the master volume, you need to really look at the schematic & layout drawings for your particuar model, and make sure to do a clean...
Leave a comment:
-
Leave a comment:
-
Thanks for keeping it going
Well, for my first message on the new board, might as well be the time I went to the Balinese in Galveston this...
Leave a comment:
Leave a comment: