Hello,
you also need the communication program which was written for xp so in a w10 pc you should run it as software compatible for xp, i attached...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
16 results in 0.0042 seconds.
Keywords
Members
Tags
-
Hello,
Do you have connection via midi (usb midi interface) or rs232 (usb rs232 interface)?
Han...
Leave a comment:
-
-
Thanks for the tip, the board was getting a lot of power from 3.3 v (1200 mA) there was 1 chip adsp21065L which was feeling hot after a few minutes so i removed...
Leave a comment:
-
I did repair the psu in my mixer but for testing separate pcb's i use a pc AT psu (black orange and red wire for 5 and 3.3 volt and yellow and blue for +/-...
Leave a comment:
-
Long time waiting for the chip from china but at the end it's replaced.
The cpu board is working but... the DSP board is not (error text "DSP...
Leave a comment:
-
Long time waiting for the chip from china but at the end it's replaced.
The cpu board is working but... the DSP board is not (error text "DSP...
Leave a comment:
-
-
FYI
Some pictures of my behringer stack, where the multicable (1# CAT5) transports 3X ADAT (24 channels) in and 1X ADAT (8 channels) out....
Leave a comment:
-
Philbo: As I mentioned before, first I ordered the AMD386SC300 and received the one on the picture but looking on the original it should be ELAN SC300 33KC...
Leave a comment:
-
Here i am again, long time agow i ordered 2 # am386sc300 in china.
I replaced the processor, NO LUCK.
But i think it's because i received the...
Leave a comment:
-
Hello again.
It was very hard to do but i've made it! The processor on the cpu board is removed and the pcb is still in a good state.
See attached...
Leave a comment:
-
Thank for the info but the chip has an FQFP shape and not BGA (so i'm lucky ??).
Anyway now i'm looking for the processor and i don't think i can reuse...
Leave a comment:
-
Thanks for the tip.
I have also looked at Soldering a QFP and going to practice on an old motherboard.
Also this is usefull http://www.avr...
Leave a comment:
-
Hello again,
I have concluded that i have to replace the am386sc300 on the cpu board so i ask to the forum has anyone did this before.
All info...
Leave a comment:
-
Hello,
Here's another DDX3216 with big problems. When turning on the display is black, a lot of the leds are lit and thats all.
The psu seems...
Leave a comment:
Leave a comment: