Thank you! Hit me up if you would like to pick up a 6x12.
Best Wade
MONOLITH Loudspeakers & Effects
PDX Or
Announcement
Collapse
No announcement yet.
Search Result
Collapse
98 results in 0.0102 seconds.
Keywords
Members
Tags
-
They returned the original one to me, so I have it my possession, if that was your concern.
Leave a comment:
-
I did, it didnt help me. Unfortunately my problems may be larger than they seem? ***As a side note I have individually checked EVERY resistor in this circuit,...
Leave a comment:
-
Cool thanks. I have plenty o' those. I am really hoping this will solve my issues but yes I am concerned about the output tubes, stress and such. The pace...
Leave a comment:
-
Its possible I have "amp repair fog" in my head. Ill check it again.
I am going to go ahead and change V2 back to stock and swap the...
Leave a comment:
-
Well, in my quest to bring this amp back to life, I have noticed some modifications to V2. Someone has jumpered pin3 and pin8 together and removed the two...Last edited by randomair; 01-25-2010, 03:02 AM.
Leave a comment:
-
There is no link to the wiring diagram, it was given to me over the phone. I guess my main question here is why my 117vac line is running 150vac? and why...
Leave a comment:
-
Your assumption is correct, this is a newer replacement from Heyboer in Michigan. I sent them the original Partridge and instead of rewinding they sent me...
Leave a comment:
-
My heaters are measuring 4.6AC and the wiring diagram for the power transformer I got from Heyboer. Everything should be wired properly. I am just getting...Last edited by randomair; 01-19-2010, 06:19 AM.
Leave a comment:
-
New power transformer issues
I have a Sound City L100W Mark III that I just replaced the power transformer on. The issue I am having is low output, the output is extremely low for 100...
-
Being the cabinets had to be rushed to the touring band shortly after being completed and the speakers were not in my possession, thats what i had to deal...
Leave a comment:
-
MONOLITH Loudspeakers 115BH Clones
Hello everyone, I own a loudspeaker company in Portland Oregon, I am cloning Sunn 0))) cabs. I wanted to share the photos with you all. Enjoy!
...
-
Hey Enzo, I had a feeling you would take a stab at this one! haha...I will check and see if I can track the make and model or try identifying by the circuit...
Leave a comment:
-
Need help identifying button transistors
Hello all, been a while since I have posted, but I have a question for you all. I have an abundance of button transistors that came from an old solid state...
-
Yeah, this was the diode test, I will try the resistance test and see where that ends up. There is a slight bit of of hum, but the one thing this amp is doing...
Leave a comment:
-
well the info on the transistors is: DELCO GM 7299803 6708. I am assuming "6708" is a date code. The readings I am getting on the one I yanked...
Leave a comment:
-
Old Standel SI15b outputs
Does anyone have any experience working on Standel SS amps? I am trying to cross-reference their NPN output transistors. Below is a picture of part of the...
-
Found the problem with channel A, there was an open 1.5 meg resistor tied to the base of an npn and the power rail. I found it by doing the testpoint tests...
Leave a comment:
-
Yeah the delay thing is a bit weird, i dont quite understand it myself. As far as the pnp's? I had them,so I just replaced them, I was in overhaul mode. ...
Leave a comment:
-
So I replaced all of the electrolytics in pre-amp board A, as well, I replaced the all of the pnp 2n4248's, but the problem is still persisting. The problem...
Leave a comment:
-
This is actually the first time I have even addressed the pre-amp boards, I have been so focused on the power supply and power amp, but now that is taken...
Leave a comment:
Leave a comment: