Announcement
Collapse
No announcement yet.
Search Result
Collapse
417 results in 0.0191 seconds.
Keywords
Members
Tags
-
It was surprising to me when Rick said that piezos held auditory superiority over magnetic pickups; given that most people think of them as weak and tinny...
-
I used to have a Washburn bass that was all piezo. It had the strip under the bridge assembly, and each individual saddle had a piezo button epoxied into...
Leave a comment:
-
-
I get at least a little bit of "donuting" with nearly every pickup. It happens more with beveled magnets, because the non-beveled ones cut through...
Leave a comment:
-
-
$100 for a few extra holes??? Am I the only one that finds this a bit crazy? I'm no machinist, but I have drilled and tapped metal before and it wasn't...
Leave a comment:
-
In order to do this, you have to hold the metal sleeve on the cord as well. Otherwise, it's gonna buzz like an angry beehive. If they are buzzing inside...
Leave a comment:
-
Do you have to program it for each pickup?
Or does it have a memory bank to store the counts of different common pickups?...
Leave a comment:
-
-
In the thread, it's mentioned that care was taken to isolate the b-string plate from actual contact with the magnets. But I do know what you mean; but if...
Leave a comment:
-
Firebird vs Deluxe minihumbuckers <- copied from Other Gibsons - MyLesPaul.com
Let me know what you think; thank you....
Leave a comment:
-
I understand your frustration. For me, it's about time management. If you just focus on the one task, then it will take a bit of time. But if you combine...
Leave a comment:
-
Try wearing an eye patch when you wind. You'll find its easier to focus on the wire. What do you mean by "getting the wire behind the bobbin"?...
Leave a comment:
-
What's wrong with a few dabs of CA? I use it; assumed it was the only way to keep things sturdy. A little bit of coil-tape helps keep thing together as...
Leave a comment:
-
Question about Firebirds and the steel coupling plate...
I want to get into these, but nobody sells ALL of the internal parts. What's missing is the steel coupling plate (as well as the b-string plate). So I went...
-
You're going to need a new magnet. Once they break, they don't go back together the way they came apart. It's just going to repel away from itself. Trying...
Leave a comment:
Leave a comment: