Announcement
Collapse
No announcement yet.
Search Result
Collapse
31 results in 0.0052 seconds.
Keywords
Members
Tags
-
Thank you Helmholtz. The lead broke off the one I'm replacing so it most likely didn't fail....
-
-
A diode wouldn't have a tolerance right? I'm pretty sure it's a vintage glass cap.
Leave a comment:
-
Glass capacitor
I'm working on a vintage organ and it has glass capacitors. I am not sure if I'm reading the value right. This one has 200 on it and the tolerance below....
-
I'm having the exact same problem with an Orange OR-15. If I use my light bulb current limiter, the HT fuse does not blow and I have output. If I don't use...
Leave a comment:
-
The relays are like the photo above. I can manually push the contact with a wooden stick. Neither relay is pulling in at power-up....
Leave a comment:
-
Hey nevetslab, thank you for your very detailed response. A little backstory on this amp. It came to me pretty fried up with noticeable burnt components....
Leave a comment:
-
I am having the same problem with an SVT 4 Pro only with both channels. Was there a solution to this?
Leave a comment:
-
Weak/Distorted Sound from old Roland Cube 40 (Orange)
I have one of the old orange Roland Cube 40s that I was initially working on to solve the problem of no reverb. Turns out someone had replaced the reverb...
-
The hum balance pot quieted it down quite a bit. I didn't think it would make that much difference.
Leave a comment:
-
Fender '68 Custom Twin Reverb Hum
I've deferred starting this thread hoping to find an answer somewhere online and while it seems to be a common problem, I could find no suggestions that made...Last edited by jeffects; 05-27-2015, 06:47 PM.
-
Okay, I have isolated the problem though I'm not sure what to do. I have a lamp current limiter that is plugged into a variac. Whenever the amp is plugged...Last edited by jeffects; 12-23-2014, 09:30 PM.
Leave a comment:
Leave a comment: