Cheers guys,
For reference, it seems there's at least 4 Microsynth designs:
110 VAC
24 VAC
24 VDC
9 VDC (hammond...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
13 results in 0.0022 seconds.
Keywords
Members
Tags
-
Na, It belongs to a friend of mine and it hasn't been used in a few years because the power socket was damaged (which I replaced) - the adapter was misplaced...
Leave a comment:
-
EH Microsynth Adapter
Hi, I have an old Microsynth here which refuses to power up... I'm not sure of the age but it's in the old-style casing...
I was told by my...
-
I haven't tried it yet, I have a couple of 3.6v zeners here but they're a lot smaller than the one I removed from the board - I'm placing a big digikey order...
Leave a comment:
-
Heh, people tell me this all the time... but then I look at those tiny little leads and freak out a little.
TBH, it's just for convinience at...
Leave a comment:
-
Someone on another forum just pointed me to this, should be fine for prototyping!
http://cimarrontechnology.com/index....geAction=VIEWP...
Leave a comment:
-
Non-S.O.I.C. Serial Flash?
Hi,
I want to add the ability to save presets to a synth I'm building but I can't find a suitable I.C. for the job. Something as small as...
-
I thought that might be what they're doing - but it seems superfluous as the the chargepump (MAX1044) is running in "boost" mode which means the...
Leave a comment:
-
Thanks Enzo, I thought it may be something like that - here's the datasheet:
http://www.national.com/ds/LM/LM13700.pdf
If a lower voltage...Last edited by kingsteven; 09-11-2007, 09:46 AM.
Leave a comment:
-
LM13600/13700 Supply Voltage?
The datasheet for the LM13600 states absolute maximum supply voltage as 36VDC or ±18V... I see a lot of audio circuits which use these I.C.s at lower voltages...
-
Awesome, I stopped recieving email alerts for this thread so I thought it would be forever as dead as this DL-4
thanks guys!...
Leave a comment:
-
Yep, here's some images... You can see where the blown diode has been removed, I have a few friends with these units, I just have...
Leave a comment:
-
Dead Line 6 DL-4
I have a dead DL-4 here which seems to work fine when connected with a 6VDC 1A PSU across the battery terminals but not at all with the Line 6 external 9VAC...
Leave a comment: