Update:
I changed out C3 and C2 with 330uF/16v caps and that cleared up the problem. The stock 100uF/16v caps were very small. The new 330uF/16v...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
67 results in 0.0062 seconds.
Keywords
Members
Tags
-
Pretty much the same noise with either adapter. What's weird is that with one adapter the other two OD pedals make the same noise, but lower in volume. The...
Leave a comment:
-
Enzo,
Thanks for the reply. I will try another adapter to see if that is the problem. I should have mentioned that I have another...
Leave a comment:
-
Problem with Boss OS-2 OD/Distortion pedal
I have a Boss OS-2 distortion pedal that makes a high pitched whine when hooked up to a Boss PSA-120S adapter. It doesn't do this with a battery. It sounds...
-
The amp has a pair of JJ6V6S tubes and a pair of EL84s that you can blend. More info here: http://www.egnateramps.com/Rebel20.html
I tried one...
Leave a comment:
-
The Super Champ layout is here:
http://www.superchamp.dk/papers/Supe...%20Diagram.jpg
schematic:
...
Leave a comment:
-
Bruce,
Thanks for the reply, but it is a 12" speaker, rated for 15w.
Thanks for the tip on, I'll look to see if it has...
Leave a comment:
-
-
Both the layout and schematic are available in this thread:
http://www.thegearpage.net/board/sho...d.php?t=226933
chuck
Leave a comment:
-
Speaker Recone?
I have an old Mojotone speaker, 12" 15W, alnico with voice coil rub.
Where would be the best place to send it to have it reconed? Does...
-
That would be the Sovtek KT-66. It is the same guts as their 6L6WXT in an ST-shaped envelope.
Compare:
http://thetubestore....
Leave a comment:
-
-
Sell it on eBay and use the proceeds to buy parts for a guitar amp build. Don't gut it and try to make it into a guitar amp.
chuck...
Leave a comment:
-
Just to add:
As an experiment, I biased a JJ 6V6S up to 19w dissipation in a Tweed Champ clone. I didn't see any red plating in the tube. ...
Leave a comment:
-
Paul,
I'd like to see the schematic. I have a Motorola chassis which looks identical to the picture you posted, but it is marked HS-606....Last edited by Chuck_Farlee; 05-29-2008, 03:26 AM.
Leave a comment:
-
I downloaded the .iso image from this site:
http://www.rebirthmuseum.com/
It didn't work when I just tried it, but it was working...
Leave a comment:
-
I'd suggest checking out the Hafler T3, the hot channel is great for shredding. Aslo check out the the ADA MP-2 and the Soho Acoustics QTR-1 preamp if you...
Leave a comment:
-
Leave a comment:
-
I was experimenting with the Valve Junior/Behringer GI100/dummy load plugged into a tubed power amp just the other day.
I have to agree with...
Leave a comment:
-
I've built a couple of champ-style circuits using the 6AQ5A and 6005, a 5F2-A Princeton and a 5C1 champ. The PT I used put about 300v plate-to-cathode on...
Leave a comment:
Leave a comment: