a coordinator to 240v?
check your FUSES in your coordinator , maybe they are blown
i hope its a step down transformer to 120 volts...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
31 results in 0.0038 seconds.
Keywords
Members
Tags
-
Slightly higher or lower than the optimum bias and you get weak and distorted effect signal.
Yes i found the trim pots broken from the wiper...
Leave a comment:
-
first try to clean the depth pot with pot cleaner
it sounds like the resistive element or wiper inside the pot is dirty
Leave a comment:
-
yes its not AC regulated because most guitar pedals don't the right capacitor value for a wall wart
If you use a wall wart to battery snap...
Leave a comment:
-
2N508 gain HFE is 120
NKT275 gain HFE is 90
AC128 gain HFE is 175
BC108 gain HFE can vary between 40 and 800
Leave a comment:
-
The wall warts might just be pulsating DC thats why its humming
if the DC is pulsating at 60hz thats why u get hum
AC ripple...
Leave a comment:
-
The LM13600's IC chip has a different pin out than the CA3094
CA3094 is a 8 pin chip
LM13600 is a 16 pin chip
The LM13600...
Leave a comment:
-
look for fluctuating voltages on the osc. chip
Yes if you see fluctuating voltages or a Sinewaveform on the output (pin 6) of the LFO or Pin...
Leave a comment:
-
RG makes it sound like its a DC voltage divider when really its a AC frequency voltage divider
Changing from 100K to 470K will change the...
Leave a comment:
-
eddie van halen wah pot curves
Dunlop EVH95 Eddie Van Halen Signature Wah Guitar
The new dunlop eddie van halen wah wah says he
had carved his own curve into the...
-
I predict that "RG" will go to great lengths not to answer the questions
in this thread
Leave a comment:
-
I thought bandwidth was the low pass cut off frequency and the high pass cut off frequency = a bandpass filter
Q is the resonance peak not...
Leave a comment:
Leave a comment: