Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.2005 seconds.
Keywords
Members
Tags
-
Yes you need that cap from Q2 emitter to ground. Also your input cap should have the positive side towards the transistor base. Then you use your guitar volume...
-
Not experienced in that but have you tried both directions of the coil? Also maybe you need to try 42 gauge and wind a full bobbin, maybe 10k.
- Likes 1
Leave a comment:
-
-
I've used a 12at7 for a v3 driver in some fender amps of that series. Measured about a watt more. More internet lore of a V1 12ax7 with gain of 100, most...
- Likes 1
Leave a comment:
-
Right, wasn't thinking, it's in parallel.
Moveable, adjustable bandpass filter would be the ticket. Not so easily made though.Last edited by mozz; 04-02-2024, 09:03 PM.
Leave a comment:
-
Does the cable capacitance come in to play, or only when volume is full?...
Leave a comment:
-
I have to ask why. If it's muddy lower the low side.
https://www.digikey.com/en/resources...gh-pass-filter
1600pf into 1 meg will...Last edited by mozz; 04-02-2024, 11:11 AM.
- Likes 1
Leave a comment:
-
All 5U4gb have a higher current rating, otherwise will work fine for the older 2 variations....
- Likes 1
Leave a comment:
-
Yes, same here, saving up now. They sell cheap testers on Ebay, MK328, which also test resistors, inductors, caps but i do love my DCA55....
Leave a comment:
-
Here are pictures of the original part numbers.
https://southsideguitars.com/product...Tan-p538587947
...
Leave a comment:
-
95W on the input side. So maybe 40-45 out?
Edit: I would try to find something with a 5v 3A rectifier winding, just because 5U4gb are much cheaper and...Last edited by mozz; 03-14-2024, 12:24 PM.
- Likes 1
Leave a comment:
-
662 is a code. Don't know if Weller elec made transformer though. Picture would be nice.
https://el34world.com/charts/transchart.htm has some very similar...
Leave a comment:
-
-
I would still put in the proper tube, 12dw7/7247 and he might even like it better.
- Likes 1
Leave a comment:
-
Fixed that for you.
"This ain't The Gear polishers"
"We don't buy snake oil here"...
- Likes 1
Leave a comment:
-
From limited 6aq5 usage, I would say you can't really abuse the specs like a 6v6. I wouldn't go much over 300v plate. I did build a 4 tube output version...
Leave a comment:
Leave a comment: