I haven't logged in since a while, so i missed a few posts.
Good one rdonne ! and thank you.
I'm still operating this unit with the disconnected...
33 results in 0.0050 seconds.
-
Update on my last post.
It is alive again. Today after work I started measuring again. I thought it was a short on the ANAIN board. Because...Leave a comment:
-
I just love this thread
Haven't been here in a while, but there is something about fixing these ddx3216's
In the meanwhile I already...Leave a comment:
-
hi Jazz,
Measured the emiter voltages, they stay at +-55 volts. so no switching rail problems for now i guess.
I observed with an infrared...Leave a comment:
-
Hi,
I really can't complain on the behringer stuff I have here. For what I use it for it's more then sufficient. Of course there is way better...Leave a comment:
-
Hi g1,
Actually it already get's warm/hot without any load attached within a few minutes. Also no signal attached to the input.
you throw...Leave a comment:
-
Hi,
80 mV (Like the other working channel)
br
MauriceLeave a comment:
-
Hi,
Very busy with other things at the moment. But yesterday I managed to connect the amp to a set of speakers. Sound was o.k. But channel 1...Leave a comment:
-
o.k.
Found a blown trace under one of the big capacitors. soldered a wire on it to restore the trace and the amp is powering up now
...Leave a comment:
-
Behringer EP2500 trying to get it working (channel 1 short probably)
Hi guys,
I have gotten great help on my DDX3116 repair on this forum thank you for that. Right now I'm trying to repair a Behringer EP2500 PA.... -
Hi,
The 12 volt is not coming from the main PSU. This voltage actually is created by the IC that is on the top of the drawing that you refer...Leave a comment:
-
Hi,
I had my fair share of problems with the display. (I think you can find my posts on this site)
I don't think you will be successful...Leave a comment:
-
Hi Guys,
One step further. Isolated the problem on the ANA-OUT part. There seems to be a MUTE signal that is also generated in the powersupply....Leave a comment:
-
O.k.
I tried another PSU from a 100% working ddx3216, all is working fine. So the problem is in the power supply.
Back to testing the PSU....Leave a comment:
-
Behringer DDX3216 repair (psu problem solved, but now distorted sound)
Hi all,
I successfully fixed a ddx3216 with the help of this forum. So it's a good place to ask advice.
Recently I got another... -
oow o.k. your eeprom is corrupted?
I found these files as well somewhere on the forum here. Can't remember where exactly. Let me know if you can't find...Leave a comment:
-
I missed a few posts I see
I know I was fighting this as well. But I managed to do it from a windows 7 machine via rs232. (Actually a laptop...Leave a comment:
-
Left it runnning for a few hours, and still going strong.
clear display, no heat sensitive symptoms.
I'm happy that it works now. But it is still...Leave a comment:
-
Hi Nick,
Good advice regarding the 10 ohms resistor for measurements.
Also I followed up on the cap removal. It was getting messy. But...Leave a comment:
-
Hi,
Short update.
Measured everything again. inputs/outputs of the toshiba T6A39's en T6A40. Can't find anything wrong. Again, disassembled...Leave a comment:
-
Hi,
Regarding the tracker (anyway that's how we call it locally here) I did a quick search on youtube https://www.youtube.com/watch?v=BF0cdo...Leave a comment:
Leave a comment: