drilling brass plate for fender-like deluxe build rework

[mikepukmel]

Thanks! No, not late, this is a leaning project. I didn't think Id get it perfect on the first try. The glue turned out to be a heck of a lot more difficult...

[mikepukmel]

Ah found it, actually was an email to Marantz: ERROR PWR2
its not in the repair manual, and the person responding to the email tech question apparently...

[mikepukmel]

I can't find the address anywhere on their site. I did ask a few questions via email, very responsive. Id like to build a Vibrolux type thing next....

[mikepukmel]

Hi Leo, (Wow, I can't believe that post is almost 8 months old, akk Ive been 'out of touch' due to too many work hours. Two steps forward, three back)....

[mikepukmel]

Thanks Helmholtz. That's what I have working (mostly) now, wasn't sure if it was 'the best way to go". I have a bus wire, its not soldered to the...

[mikepukmel]

Thanks Leo! Steady hands!! Well, my hands are not as steady as they used to be, the re-cone job didn't come out as neat as id like but they do work. ...

[mikepukmel]

Akk, I hope I can diagnose it without proprietary cables. Every time I pass by it, sitting on my son's old lincoln logs cart in the basement i think I either...

[mikepukmel]

Thanks! I haven't run it in ages, will crank it up again and get the error code (should have written it down). thanks for the manual!...

[mikepukmel]

Hi All,
Finally scrounged up a small drill press. Id like to rework the brass plate that I botched on a Deluxe Reverb build. Having some...

[mikepukmel]

I like to use loctite blue here and there, red is evil.

[mikepukmel]

Hi All,
A guy had a broken Marantz SR18 for sale for a while, dropped the price then gave it away. I was lucky (maybe?) to be first in line....

[mikepukmel]

Hi Soul, thanks will do! Sorry for late reply, been a while since I logged in. I've passed UDoIt many times cruising down 95 to bring my son to various...

[mikepukmel]

Thanks Chuck. Learning....

[mikepukmel]

So I got a little experience what kind of skills are needed to do a refoam job.

[mikepukmel]

its so old, not sure what to do with it. The magnets have 1978 date codes. No alignment pins or anything like that. As you all said, they build the plate/magnet...

[mikepukmel]

Sorry g1 (rank amateur here). I'll draw up the current layout, yeah, its been fiddled with a bit. So I started with a non reverb board because I uh, bought...

[mikepukmel]

It seems, nobody sells different lengths modular main 24 pin power cables. <frown>

[mikepukmel]

Cool, thanks Enzo. I'll grab a photo, maybe if you see it. The issue I can see is that this main heavy cable is a bit taught, and winds over the top...

[mikepukmel]

As luck, or whatever would have it, I found the site again, they're still there. Someplace in the far east? Stuff looks "really* good, photos anyway....

[mikepukmel]

I put a motherboard in an old case, and the main power cable is just a little too short. It connects but I can't route it around the motherboard to tie up...

[mikepukmel]

Thanks, will do. Even looking for a reason to crank up my old scope, haven't turned it on in ages....