Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.3861 seconds.
Keywords
Members
Tags
-
Yep.. everyone has a crt story.. old laser tech was as bad or worse. Probably the worse I got was as a kid and I accidentally touched the 220 house mains....
-
The Akai/Roberts had capstan sleeves as I remember. Yep step pulleys in some brands/models. Some even provided the conversion pulley attached by a screw to...
Leave a comment:
-
I would hard wire one pickup at a time to an output jack. Any difference? If one is bad.. put it back to the stock configuration. Any difference? It’s...
Leave a comment:
-
Yep.. I use a 2x EL84 two channel amp with a switchable attenuator. It’s all you need for clubs nowadays. Maybe a mic on it. For a less 25 watt amp...
Leave a comment:
-
Forget all of this. If you want to “tame” a 100 watt Marshall, pull 2 power tubes and get a power soak speaker attenuator. I have never understood using a...
Leave a comment:
-
Does this amp require the foot switch for the Reverb to work? It has a pretty complex 3 button foot switch. I would look at that as well.
Leave a comment:
-
Just put a chunk of foam rubber behind the pickup and screw 3 screws of the appropriate length into the body. Just make sure they don’t penetrate the...
Leave a comment:
-
I’ve done blind tests with “golden ears” musicians and no one could tell the difference with a range of cables in good repair for the most...
Leave a comment:
-
Leave a comment:
-
Do you mean something to plug into the effects loop? Honestly I’ve done that. Just a foot switchable volume control that plugs into the effects loop....
Leave a comment:
-
Bet the knobs aren’t original. Nice “big headstock” Strat. Pay attention to the micro tilt mechanism.
Leave a comment:
-
Start with the basics. Clean the tape monitor switches. Take a line out from your preamp section (tape rec) and see if it’s clean into another amp....
Leave a comment:
-
More important is if you like the way it sounds. I had a 1960 Ampeg Rocket for years. It was the 6v6 version. Cool that it was made in NYC.. but it was never...
Leave a comment:
-
If you search KLD on eBay you will see a sh@t load of stuff. There are lots of different amp kits, even completed kit amps. Chassis and boards too.
Leave a comment:
-
-
Has anyone been paying attention to KLD?
They have been offering a lot of kit options and preassembled kits, free shipping on eBay. This one looks ok except I’m not sold on 2x6L6 finals for a 25...
-
How many times do we see in a thread.. “Concerning the OP...” after some conversational divergence? There are bench techs here, there are engineers, there...
Leave a comment:
-
You also may be able to drill them out from the back side and simply put a screw through the hole with a nut in the top.
Leave a comment:
-
Most Oranges aren’t that complex and repairable using basic troubleshooting skills. Fender (or anything else).. if you have trouble with a DSP circuit.....
Leave a comment:
-
It goes back to what nosaj said. With Music Man you better know what your doing if you are working on their “hybrid” models. You aren’t...
Leave a comment:
-
Since you have decided to rewind anyway. Have you inspected where the coil wires connects to the eyelets and tried reflowing the connections at the eyelets...
Leave a comment:
Leave a comment: