Announcement
Collapse
No announcement yet.
Search Result
Collapse
113 results in 0.0115 seconds.
Keywords
Members
Tags
-
Just wondering if anyone has resolved this issue with the 1990. I recently acquired one that is doing the same, also pre-infinium. After playing for a while,...
-
I apologize for the mis-leading info. I was thinking of my own build, and mine is not true to the Fender schematic. I have 1 main filter,a 40uf and a 40uf...Last edited by ajeffcote; 09-16-2013, 11:10 PM.
Leave a comment:
-
The 3 16uf caps are the pre-amp supply and filter caps. The other caps are 1, the main power supply filter cap and 2, the screen supply cap. So it goes along...Last edited by ajeffcote; 09-15-2013, 05:38 PM.
Leave a comment:
-
http://www.el34world.com/charts/images/grounds.gif
This shows the buss wire across the backs of the pots, which is how I did mine. But it makes...
Leave a comment:
-
I didn't think of the bias supply filter. I installed a larger cap, 100uf if I remember correctly. Think Fender used a 50uf. I will try swapping it out. ...
Leave a comment:
-
Thank you for the reply. I tried reducing the actual tone stack, but I didn't like that and returned it to stock values. The cap feeding the PI is still stock,...
Leave a comment:
-
My Ab763 Has Gas
What's the best way to reduce the lows that make the speaker fart without reducing the "depth" of the sound? I don't want to lose audible lows,...
-
Somebody, anybody tried the FullMusic or the Northern Electric 12AX7's? I think I have asked that question too much already, but just once more to make sure....
Leave a comment:
-
The 12AX7LPS is a decent tube, but not for combo's. I have a 12"x12" box of Russian tubes sitting in my closet. Some of them are decent, but I can't...
Leave a comment:
-
I am so glad that there are finally some good tubes being manufactured again! And I'm really stoked about the Northern Electric/Full Music 12AX7. From all...
Leave a comment:
-
Winged C 6L6GC + TubeDepot
I have wanted to try some of 'em for a long time. I finally broke down and bought a matched pair from the TubeDepot.
The service...
-
Oh man, I forgot about this thread. But I just fired up my Allen Accomplice after the tinkering I have been doing. I put a PS in the tone stack and one for...
Leave a comment:
-
I can't believe it! I called the Tube Store and offered my services in a very professional manner and believe it or not, the fellow I was talking...
Leave a comment:
-
I had the same feeling from the wording in their description. Where-ever they were made I would still like to try one. I think I'll give'em a call and offer...
Leave a comment:
-
Pre-Amp Plate Load Resistors
The circuit is an AB763. Running two 6L6GCs. Can I use 1/2 watt plate load resistors? And about the reverb driver cathode resistor, is a two watt OK?
-
I think you are right about the love of silver micas. I guess my tastes have evolved and I now need those gold foil-in-olive oil caps that are as we speak...
Leave a comment:
-
The leads are quite flimsy. I can see how malted beverages could play a part in their early demise.
Have you noticed any sonic differences?...
Leave a comment:
-
JP, the amp is an Allen Accomplice. I have very limited experience in electronics, built the Allen kit and re-built a Deluxe Reverb. No formal electrical...
Leave a comment:
-
Polystyrene Caps vs Silver Mica?
Hi, can anyone give me a little input on these? I've read that the PS caps sound smoother than the SM's, but still let the "shimmer" ring through....
-
Northern Electric Tubes
Saw these at the Tubestore.
Northern Electric 12AX7
Has anybody tried them, and if so what's your opinion?
Leave a comment: